We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare boards with gold contacts

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 ECC RDIMM 2Rx4 CL40 1.1V 288-Pin Dell PowerEdge XE9640 memory upgrade

SKU CH-28EA-TP7AJ

128 GB DDR5 ECC registered server memory kit, two 64 GB modules at 4800 MT/s with CL40 latency and 1.1 V operation for Dell PowerEdge XE9640

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity from two 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM protects data integrity
  • 2Rx4 dual-rank organisation optimises density
  • 1 V operation at CL40 latency for Dell PowerEdge XE9640

Dell PowerEdge XE9640 server memory upgrade

This 128 GB kit uses two 64 GB DDR5 4800 ECC registered DIMMs built for the Dell PowerEdge XE9640 rack server. Each module runs at 1.1 V with CL40 latency and a 2Rx4 organisation. The registered buffer and on-die ECC protect data integrity in multi-socket workloads.

288-pin RDIMM kit for registered DDR5 slots

The modules install directly into the server’s 288-pin DDR5 RDIMM sockets and require a platform that supports registered ECC memory. Two slots are consumed, leaving remaining channels free for further capacity expansion. No heat spreader is fitted, so airflow across the bare PCB is required.

1.1 V operation at DDR5 4800 speed

Standard JEDEC 1.1 V voltage keeps power draw low while delivering PC5-38400 bandwidth. Registered buffering adds minimal latency and reduces electrical load on the memory controller. With no onboard thermal solution, system fans must move enough air to keep the modules within spec under sustained load.

Highlights

  • 128 GB total capacity from two 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM protects data integrity
  • 2Rx4 dual-rank organisation optimises density
  • 1 V operation at CL40 latency for Dell PowerEdge XE9640

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the CL40 latency become a bottleneck during sustained workloads?

CL40 is the rated CAS latency for these DDR5 4800 modules; actual sustained throughput depends on the Dell PowerEdge XE9640 memory controller and workload mix.

What thermal or power behaviour should be expected when the kit runs continuously at 1.1V?

The modules operate at 1.1V without heat spreaders; thermals are managed by the server chassis airflow and the registered buffer reduces electrical load on the memory bus.

Which server configuration is required before installing this 2Rx4 registered ECC kit?

The kit is validated for Dell PowerEdge XE9640 systems that support DDR5 4800 registered ECC RDIMMs in a 288-pin slot population.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.