Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green circuit boards with black chips in a clear plastic tray

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 2933 CL21 2Rx8 UDIMM memory upgrade

SKU CH-VPVN-60M9C

A 128 GB DDR4 kit of four 32 GB modules running at 2933 MHz CL21 1.2 V, validated for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for high-density multitasking
  • DDR4 2933 MHz speed with CL21 latency for responsive data throughput
  • 20 V operation reduces power draw while maintaining rated performance
  • 2Rx8 dual-rank architecture matches controller expectations for full-speed recognition
  • Validated fitment for Supermicro X12SCQ and X12SCZ-QF motherboards

Exact-Match Upgrade for Supermicro X12SCQ /

This 128GB kit contains four 32GB DDR4 2933 UDIMM modules built to the precise rank, voltage, and timing your motherboard expects. It is designed for desktop PCs using the Supermicro X12SCQ or X12SCZ-QF boards and installs as a matched set for full-capacity recognition.

DDR4 2933 Unbuffered UDIMM Interface Limits

The DDR4 2933 standard delivers PC4-23400 bandwidth through a 288-pin unbuffered connection at 1.2V. This kit operates at CL21 latency with a 2Rx8 organisation, so the memory controller must support that exact speed, timing, and rank configuration for stable operation at rated specifications.

2Rx8 Rank Organisation Determines Compatibility

The dual-rank 2Rx8 layout on each 32GB module decides whether your board's memory population rules allow all four slots to run at 2933MHz. Systems limited to single-rank DIMMs or lower maximum ranks per channel will not support this kit at its rated speed or capacity.

Pluspunten

  • 128 GB total capacity from four 32 GB modules for high-density multitasking
  • DDR4 2933 MHz speed with CL21 latency for responsive data throughput
  • 20 V operation reduces power draw while maintaining rated performance
  • 2Rx8 dual-rank architecture matches controller expectations for full-speed recognition
  • Validated fitment for Supermicro X12SCQ and X12SCZ-QF motherboards

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I pick the 128 GB kit or buy single 32 GB modules to reach the same total?

The kit supplies four matched 32 GB modules that are tested together, so the motherboard sees identical timing and rank on every slot and boots at the rated 2933 MT/s without manual tuning.

Will the CL21 CAS latency slow down my Supermicro X12SCQ compared with lower-latency RAM?

The board's memory controller is validated for CL21 at 2933 MT/s, so the kit runs at the full rated speed without down-clocking; tighter timings would require modules the board does not officially support.

Does the PC4-23400 rating limit bandwidth on a DDR4 2933 system?

PC4-23400 is the peak transfer rate for DDR4 2933, so the kit delivers the maximum bandwidth the memory controller can use at that speed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.