NEMIX RAM DDR4 ECC Unbuffered UDIMM 64GB (4x16GB) 2933MHz CL21 1.2V 288-Pin memory upgrade
- 64GB (4 x 16GB)
- 288-Pin DDR4 ECC UD…
NEMIX RAM
A 128 GB DDR4 kit of four 32 GB modules running at 2933 MHz CL21 1.2 V, validated for Supermicro X12SCQ and X12SCZ-QF motherboards
Size 128GB 4X32GB
This 128GB kit contains four 32GB DDR4 2933 UDIMM modules built to the precise rank, voltage, and timing your motherboard expects. It is designed for desktop PCs using the Supermicro X12SCQ or X12SCZ-QF boards and installs as a matched set for full-capacity recognition.
The DDR4 2933 standard delivers PC4-23400 bandwidth through a 288-pin unbuffered connection at 1.2V. This kit operates at CL21 latency with a 2Rx8 organisation, so the memory controller must support that exact speed, timing, and rank configuration for stable operation at rated specifications.
The dual-rank 2Rx8 layout on each 32GB module decides whether your board's memory population rules allow all four slots to run at 2933MHz. Systems limited to single-rank DIMMs or lower maximum ranks per channel will not support this kit at its rated speed or capacity.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD23400-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The kit supplies four matched 32 GB modules that are tested together, so the motherboard sees identical timing and rank on every slot and boots at the rated 2933 MT/s without manual tuning.
The board's memory controller is validated for CL21 at 2933 MT/s, so the kit runs at the full rated speed without down-clocking; tighter timings would require modules the board does not officially support.
PC4-23400 is the peak transfer rate for DDR4 2933, so the kit delivers the maximum bandwidth the memory controller can use at that speed.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?