BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00281128BTC
Op voorraad
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-PIN SODIMM POSIFLEX RT-6016Q-G2 memory upgrade
16GB DDR4 3200 CL22 SODIMM module built for POSIFLEX RT-6016Q-G2 terminals
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 SODIMM adds responsive multitasking
- CL22 latency and 1.2 V operation keep power draw low
- 2Rx8 dual-rank layout maximises memory bandwidth
- 260-pin form factor fits POSIFLEX RT-6016Q-G2 slots directly
- Rigorously stress-tested modules ensure reliable terminal uptime
POSIFLEX RT-6016Q-G2 Terminal Memory
This 16 GB DDR4 SODIMM is built for the POSIFLEX RT-6016Q-G2 point-of-sale terminal. It uses a 260-pin unbuffered non-ECC layout running at 3200 MHz with CL22 latency at 1.20 V. The single-module design fits the slim chassis without modification.
Upgrade from lower-capacity DDR4 SODIMMs
Replacing an 8 GB or smaller stick with this 16 GB module doubles the terminal's memory headroom for multi-application workloads. The jump is worth it when the POS software, local database and background services run simultaneously. Systems already at the platform maximum will not benefit.
DDR4 SODIMM interface limits
The DDR4 SODIMM standard caps bandwidth at the rated 25600 MT/s transfer rate and requires 1.2 V operation. CL22 timing is fixed by the module's SPD profile and cannot be tightened without firmware support the terminal may not expose. Higher-frequency DDR4 modules will downclock to 3200 MHz.
Pluspunten
- 16 GB DDR4 3200 SODIMM adds responsive multitasking
- CL22 latency and 1.2 V operation keep power draw low
- 2Rx8 dual-rank layout maximises memory bandwidth
- 260-pin form factor fits POSIFLEX RT-6016Q-G2 slots directly
- Rigorously stress-tested modules ensure reliable terminal uptime
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Vragen over dit artikel
Does this 260-PIN DDR4 SODIMM fit the POSIFLEX RT-6016Q-G2 terminal?
Yes, the module is built as a 260-PIN DDR4 SODIMM specifically for the POSIFLEX RT-6016Q-G2 Stylish Slim Terminal.
What is the correct orientation step when inserting the SODIMM into the slot?
Align the notch on the module edge with the key in the socket, press firmly until the side clips snap into place.
Will this 16 GB DDR4 3200 CL22 stick need any firmware update or battery replacement over time?
No firmware or battery is involved; the memory operates at 1.2 V and only requires reseating if the terminal is moved frequently.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00283743BTC
Op voorraad
