Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB DDR5 5600 CL46 2Rx8 ECC RDIMM 6x32GB memory upgrade for Supermicro H14SHM

SKU CH-CQK2-8YXGX

A 192GB DDR5-5600 ECC registered kit of six 32GB 2Rx8 modules at 1.1V CL46, validated for the Supermicro H14SHM motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Nog 24 configuraties tonen
  • 192GB capacity from six 32GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for H14SHM workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation at 2Rx8 rank matches the motherboard's memory controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SHM DIMM slots without adapters

192GB DDR5-5600 ECC RDIMM kit for Supermicro H14SHM

This 192GB kit contains six 32GB DDR5 RDIMMs rated at 5600MHz with CL46 latency. Registered ECC architecture and 1.1V operation match the Supermicro H14SHM memory controller requirements for full-capacity recognition at rated speed. It is built for servers that require registered modules and error correction.

Sustained-load stability with registered ECC

Registered buffering reduces electrical load on the memory controller so all six slots remain stable at full population during continuous workloads. ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots that can interrupt production services. The 1.1V rating supports efficient power draw under constant utilisation.

2Rx8 rank configuration decides compatibility

The dual-rank 2Rx8 organisation per module determines whether the motherboard can address the full 192GB across its supported channels. Buyers who need a different rank structure or a lower total capacity for their specific population rules should verify the manual before ordering. This kit only fits systems accepting 288-pin DDR5 RDIMMs.

Pluspunten

  • 192GB capacity from six 32GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for H14SHM workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation at 2Rx8 rank matches the motherboard's memory controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SHM DIMM slots without adapters

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How much power does the 1.1V DDR5 5600 kit draw when the server runs all day?

Each module operates at 1.10V, the standard DDR5 voltage, so total power scales with the 192GB capacity and your workload rather than a fixed wattage figure.

What must the motherboard provide for these 288-pin RDIMMs to function?

The board needs DDR5 RDIMM slots that support registered ECC memory, 2Rx8 organization, and a 1.10V supply — exactly what the Supermicro H14SHM specifies.

Can I keep existing DDR5 RDIMMs installed while adding this 6x32GB kit?

Yes, provided the other modules are also DDR5 registered ECC with matching voltage and the board's population rules allow mixed capacities across all populated channels.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.