Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 1TB (16 x 64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro H13DSH

SKU CH-KGR9-2GCWC

A 1TB DDR5 registered ECC memory kit of 16 64GB modules at 5600MHz CL46 1.1V for Supermicro H13DSH servers

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB capacity from 16 matched 64GB modules for full server density
  • DDR5 5600 speed with CL46 latency at 1.1V for rated performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor built to the Supermicro H13DSH specification
  • Major OEM Samsung, Micron or Hynix chips under NEMIX qualification

Server memory kit for Supermicro H13DSH

This 1 TB kit contains 16 DDR5 RDIMM modules, each 64 GB, rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for administrators who need the full registered ECC capacity that the H13DSH memory controller expects.

Installation follows standard 288-pin RDIMM seating

The motherboard manual defines the required population order for all 16 slots; skipping that order or mixing ranks is the most common reason the system fails to post or reports reduced capacity.

Registered buffering keeps every slot stable

ECC corrects single-bit errors continuously, preventing silent data corruption during sustained workloads, while the 1.1 V rating maintains consistent power draw across all populated channels.

Pluspunten

  • 1TB capacity from 16 matched 64GB modules for full server density
  • DDR5 5600 speed with CL46 latency at 1.1V for rated performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor built to the Supermicro H13DSH specification
  • Major OEM Samsung, Micron or Hynix chips under NEMIX qualification

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I verify the 16 modules are running at DDR5 5600 CL46 after installing them in the Supermicro H13DSH?

Check the BIOS or operating-system memory report to confirm all 16 modules show DDR5 5600 (PC5-44800) speed, CL46 latency, 1.10V voltage and 2Rx4 registered ECC status.

What comes in the 1TB kit and is anything else required for the Supermicro H13DSH?

The kit contains sixteen 64GB 288-pin DDR5 RDIMM modules; no additional memory parts are needed, but consult the motherboard manual for the correct DIMM population order before installation.

Which capacity and rank configuration should I select for a fully populated Supermicro H13DSH?

This 1TB kit provides sixteen 64GB 2Rx4 registered ECC modules, matching the board's DDR5 5600 1.1V CL46 specification for full-capacity operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.