We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 1TB (16 x 64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro H13DSH

SKU CH-KGR9-2GCWC

A 1TB DDR5 registered ECC memory kit of 16 64GB modules at 5600MHz CL46 1.1V for Supermicro H13DSH servers

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

Show 30 more configurations
  • 1TB capacity from 16 matched 64GB modules for full server density
  • DDR5 5600 speed with CL46 latency at 1.1V for rated performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor built to the Supermicro H13DSH specification
  • Major OEM Samsung, Micron or Hynix chips under NEMIX qualification

Server memory kit for Supermicro H13DSH

This 1 TB kit contains 16 DDR5 RDIMM modules, each 64 GB, rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for administrators who need the full registered ECC capacity that the H13DSH memory controller expects.

Installation follows standard 288-pin RDIMM seating

The motherboard manual defines the required population order for all 16 slots; skipping that order or mixing ranks is the most common reason the system fails to post or reports reduced capacity.

Registered buffering keeps every slot stable

ECC corrects single-bit errors continuously, preventing silent data corruption during sustained workloads, while the 1.1 V rating maintains consistent power draw across all populated channels.

Highlights

  • 1TB capacity from 16 matched 64GB modules for full server density
  • DDR5 5600 speed with CL46 latency at 1.1V for rated performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor built to the Supermicro H13DSH specification
  • Major OEM Samsung, Micron or Hynix chips under NEMIX qualification

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I verify the 16 modules are running at DDR5 5600 CL46 after installing them in the Supermicro H13DSH?

Check the BIOS or operating-system memory report to confirm all 16 modules show DDR5 5600 (PC5-44800) speed, CL46 latency, 1.10V voltage and 2Rx4 registered ECC status.

What comes in the 1TB kit and is anything else required for the Supermicro H13DSH?

The kit contains sixteen 64GB 288-pin DDR5 RDIMM modules; no additional memory parts are needed, but consult the motherboard manual for the correct DIMM population order before installation.

Which capacity and rank configuration should I select for a fully populated Supermicro H13DSH?

This 1TB kit provides sixteen 64GB 2Rx4 registered ECC modules, matching the board's DDR5 5600 1.1V CL46 specification for full-capacity operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.