NEMIX RAM
NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Kit
256 GB kit of sixteen 16 GB DDR5 4800 CL40 ECC registered DIMMs validated for Supermicro SuperServer systems
- Capacity256GB (16 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256GB total capacity from sixteen 16GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM design protects data integrity
- CL40 CAS latency at 1.10V operating voltage
- Validated for SuperMicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L
SuperMicro DDR5 4800 ECC RDIMM kit
This 256GB kit contains sixteen 16GB DDR5 4800 registered DIMMs built for SuperMicro Storage SuperServer models SSG-521E-E1CR24H, SSG-521E-E1CR24L and X13SEDW. ECC and registered signalling protect data integrity in enterprise workloads. Modules run at 1.1V with CL40 latency and a 1Rx8 organisation. IT teams upgrading these specific platforms gain a validated, high-density memory solution.
Thermals, noise and power
Each module operates at the standard DDR5 1.10V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw predictable. Passive components produce no audible noise. The 4800 MT/s speed at CL40 delivers rated bandwidth while staying within JEDEC baseline voltage.
Build quality and connectors
Major OEM Samsung, Micron or Hynix DRAM chips are assembled on 288-pin RDIMM PCBs and stress tested under load before shipping. The registered design and ECC function require motherboard support for registered DIMMs and error correction. Populating all sixteen slots achieves the full 256GB capacity; partial fills are possible but reduce total memory. No heat spreaders mean clearance is minimal for tight DIMM spacing.
Pluspunten
- 256GB total capacity from sixteen 16GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM design protects data integrity
- CL40 CAS latency at 1.10V operating voltage
- Validated for SuperMicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Vragen over dit artikel
How do I install these 288-pin DDR5 RDIMMs in my Supermicro SSG-521E-E1CR24H, and what step do people skip?
Power down, unplug, open the chassis, align each module's notch with the slot key, press firmly until both latches click, then verify all 16 modules show in BIOS. The step often missed is seating every module fully so both latches engage.
What maintenance or replacement will this 256GB kit need later?
No routine maintenance is required. ECC corrects single-bit errors on the fly. Replace a module only if the system logs uncorrectable errors or a DIMM fails POST. Keep firmware current for best compatibility.
What limit appears first under sustained load with these CL40 1.1V modules?
The memory controller's thermal and power envelope is reached before the DRAM's rated speed. Expect throttling or reduced bandwidth once the CPU's memory subsystem hits its sustained power limit.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.



