我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Kit

SKU CH-YFZT-V6N10

256 GB kit of sixteen 16 GB DDR5 4800 CL40 ECC registered DIMMs validated for Supermicro SuperServer systems

  • Capacity256GB (16 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256GB total capacity from sixteen 16GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design protects data integrity
  • CL40 CAS latency at 1.10V operating voltage
  • Validated for SuperMicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L

SuperMicro DDR5 4800 ECC RDIMM kit

This 256GB kit contains sixteen 16GB DDR5 4800 registered DIMMs built for SuperMicro Storage SuperServer models SSG-521E-E1CR24H, SSG-521E-E1CR24L and X13SEDW. ECC and registered signalling protect data integrity in enterprise workloads. Modules run at 1.1V with CL40 latency and a 1Rx8 organisation. IT teams upgrading these specific platforms gain a validated, high-density memory solution.

Thermals, noise and power

Each module operates at the standard DDR5 1.10V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw predictable. Passive components produce no audible noise. The 4800 MT/s speed at CL40 delivers rated bandwidth while staying within JEDEC baseline voltage.

Build quality and connectors

Major OEM Samsung, Micron or Hynix DRAM chips are assembled on 288-pin RDIMM PCBs and stress tested under load before shipping. The registered design and ECC function require motherboard support for registered DIMMs and error correction. Populating all sixteen slots achieves the full 256GB capacity; partial fills are possible but reduce total memory. No heat spreaders mean clearance is minimal for tight DIMM spacing.

商品特色

  • 256GB total capacity from sixteen 16GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design protects data integrity
  • CL40 CAS latency at 1.10V operating voltage
  • Validated for SuperMicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

商品問答

How do I install these 288-pin DDR5 RDIMMs in my Supermicro SSG-521E-E1CR24H, and what step do people skip?

Power down, unplug, open the chassis, align each module's notch with the slot key, press firmly until both latches click, then verify all 16 modules show in BIOS. The step often missed is seating every module fully so both latches engage.

What maintenance or replacement will this 256GB kit need later?

No routine maintenance is required. ECC corrects single-bit errors on the fly. Replace a module only if the system logs uncorrectable errors or a DIMM fails POST. Keep firmware current for best compatibility.

What limit appears first under sustained load with these CL40 1.1V modules?

The memory controller's thermal and power envelope is reached before the DRAM's rated speed. Expect throttling or reduced bandwidth once the CPU's memory subsystem hits its sustained power limit.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。