Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-ENYN-2CDQG

32 GB kit of two 16 GB DDR5-4800 ECC registered DIMMs at 1.1 V, CL40, 1Rx8, validated for the Supermicro H14DST-FL motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Registered ECC protects data integrity on every write
  • Exact DDR5-4800 CL40 1.1V spec matches controller expectations
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL slots
  • Dual-rank 1Rx8 layout enables full-capacity population
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR5 RDIMM kit for Supermicro H14DST-FL

This 32 GB kit comprises two 16 GB DDR5 4800 Registered ECC modules built to the 1Rx8 rank and 1.1 V specification the motherboard expects. It is intended for administrators upgrading or populating a Supermicro H14DST-FL server with validated memory.

32 GB capacity with DDR5 4800 speed and CL40 latency

The two 1Rx8 RDIMMs deliver 32 GB of error-correcting registered memory at the board's native DDR5 4800 (PC5-38400) data rate. Registered buffering allows full-slot population at rated speed, while ECC corrects single-bit errors to prevent silent data corruption.

Replaces unvalidated or mismatched DDR5 modules

Installing this spec-matched kit removes the risk of boot failures, reduced speeds, or capacity limits caused by incorrect rank, voltage, or timing combinations. The upgrade is worthwhile when the server requires guaranteed compatibility and registered ECC stability for production workloads.

Pluspunten

  • Registered ECC protects data integrity on every write
  • Exact DDR5-4800 CL40 1.1V spec matches controller expectations
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL slots
  • Dual-rank 1Rx8 layout enables full-capacity population
  • Lifetime replacement warranty with US-based technical support

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 2x16GB DDR5 4800 CL40 kit work if I keep my existing RDIMMs in the other slots on the H14DST-FL?

Mixing ranks or speeds can prevent full-speed operation. Populate all channels with identical 1Rx8 DDR5-4800 modules for the controller to run at rated 4800 MT/s.

How do I verify the kit is running at DDR5-4800 with ECC active after install?

Check BIOS memory info for 4800 MT/s, CL40, 1.10 V, and ECC enabled. Run a memtest pass; zero correctable errors confirms ECC is correcting single-bit faults.

Does the package include only the two 16GB RDIMMs or any extra parts?

The box contains exactly the two 16GB DDR5 4800 CL40 288-pin ECC Registered RDIMMs. No heat spreaders, cables, or tools are supplied.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.