Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with gold contacts and black memory chips, 288-pin DDR5 RDIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-7V96-JV1ZQ

64 GB DDR5 4800 CL40 2Rx4 registered ECC RDIMM validated for Supermicro H13DSH motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB

Nog 30 configuraties tonen

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • 64GB DDR5-4800 capacity meets server workload demands
  • CL40 latency and 1.1V operation match controller expectations
  • 2Rx4 Registered ECC architecture enables full-slot population with error correction
  • 288-pin RDIMM form factor fits Supermicro H13DSH memory slots exactly
  • Major OEM chips from Samsung, Micron, or Hynix deliver enterprise-grade reliability

Supermicro H13DSH DDR5 ECC RDIMM Upgrade

This 64GB DDR5 module is built for the Supermicro H13DSH motherboard and delivers registered ECC memory at 4800MHz. It targets administrators who need to expand server capacity with a module that matches the board's population rules and memory-controller expectations.

Sustained Load Behaviour

Registered architecture offloads the memory controller so every populated slot runs at the rated 4800MHz speed under continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running production tasks.

Build and Connector Implications

The 288-pin RDIMM form factor fits only boards wired for registered DIMMs, not UDIMM or SODIMM slots. No heat spreader is fitted, so airflow across the module must come from the chassis design. Verify the manual for supported capacities and DIMM population order before installation.

Pluspunten

  • 64GB DDR5-4800 capacity meets server workload demands
  • CL40 latency and 1.1V operation match controller expectations
  • 2Rx4 Registered ECC architecture enables full-slot population with error correction
  • 288-pin RDIMM form factor fits Supermicro H13DSH memory slots exactly
  • Major OEM chips from Samsung, Micron, or Hynix deliver enterprise-grade reliability

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How much heat and power does this 1.10 V 64 GB DDR5 RDIMM add when the server runs all day?

Operating at 1.10 V, this DDR5 registered ECC module draws minimal power per DIMM; the registered buffer reduces electrical load on the memory controller, helping keep system thermals manageable during continuous operation.

What motherboard slot and population rules must my Supermicro H13DSH already have free for this 288-pin 2Rx4 kit?

The board needs an available 288-pin DDR5 RDIMM slot and must follow the manual's population order for 2Rx4 registered modules; the kit is spec-matched to the H13DSH memory controller requirements.

Will this CL40 2Rx4 registered ECC kit run at 4800 MT/s alongside older DDR5 modules I might keep in the same chassis?

Mixed-rank or mixed-speed DDR5 populations default to the lowest common speed and timing; for stable 4800 MT/s CL40 operation the H13DSH should use identical 2Rx4 registered ECC DIMMs in the recommended slot order.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.