Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3515 memory upgrade

SKU CH-H0XQ-NEVP0

8GB DDR3 SODIMM running at 1333MHz with 1.35V low voltage for POSIFLEX PS-3515 terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB DDR3 1333 boosts POS terminal speed
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits Posiflex PS-3515 directly
  • CL9 latency supports responsive transaction processing
  • 2Rx8 organisation delivers stable enterprise operation

POSIFLEX PS-3515 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX PS-3515 point-of-sale terminal. It runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin unbuffered module uses 2Rx8 Samsung, Micron or Hynix chips.

Retail and kiosk operators needing a direct

Shops that run the PS-3515 fanless terminal can install this single stick without configuration changes. Systems that require ECC, registered DIMMs or a different pin count cannot use this module.

Sustained workload behaviour

The module is stress-tested under load to verify stability during long trading hours. Unbuffered DDR3 at 1.35 V keeps power draw low inside the fanless chassis. No heat spreader is fitted, so airflow in the terminal handles thermal dissipation.

Pluspunten

  • 8GB DDR3 1333 boosts POS terminal speed
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits Posiflex PS-3515 directly
  • CL9 latency supports responsive transaction processing
  • 2Rx8 organisation delivers stable enterprise operation

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

What POS terminal must I already own for this SODIMM to be compatible?

This module is validated for the POSIFLEX PS-3515 fanless point-of-sale terminal and is designed to fit its 204-pin DDR3 SODIMM slot.

Will this DDR3-1333 module run correctly if my PS-3515 currently uses slower DDR3 memory?

The memory operates at 1333 MHz with CL9 latency at 1.35 V; the system will automatically clock it down to match any slower installed modules.

How can I confirm the upgrade is recognised after installation?

Power on the terminal and check the BIOS or operating-system memory information — it should show an 8 GB DDR3-1333 module at 1.35 V.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.