Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3515 memory upgrade

SKU CH-H0XQ-NEVP0

8GB DDR3 SODIMM running at 1333MHz with 1.35V low voltage for POSIFLEX PS-3515 terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB DDR3 1333 boosts POS terminal speed
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits Posiflex PS-3515 directly
  • CL9 latency supports responsive transaction processing
  • 2Rx8 organisation delivers stable enterprise operation

POSIFLEX PS-3515 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX PS-3515 point-of-sale terminal. It runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin unbuffered module uses 2Rx8 Samsung, Micron or Hynix chips.

Retail and kiosk operators needing a direct

Shops that run the PS-3515 fanless terminal can install this single stick without configuration changes. Systems that require ECC, registered DIMMs or a different pin count cannot use this module.

Sustained workload behaviour

The module is stress-tested under load to verify stability during long trading hours. Unbuffered DDR3 at 1.35 V keeps power draw low inside the fanless chassis. No heat spreader is fitted, so airflow in the terminal handles thermal dissipation.

Najważniejsze cechy

  • 8GB DDR3 1333 boosts POS terminal speed
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits Posiflex PS-3515 directly
  • CL9 latency supports responsive transaction processing
  • 2Rx8 organisation delivers stable enterprise operation

Specyfikacja

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Pytania dotyczące tego produktu

What POS terminal must I already own for this SODIMM to be compatible?

This module is validated for the POSIFLEX PS-3515 fanless point-of-sale terminal and is designed to fit its 204-pin DDR3 SODIMM slot.

Will this DDR3-1333 module run correctly if my PS-3515 currently uses slower DDR3 memory?

The memory operates at 1333 MHz with CL9 latency at 1.35 V; the system will automatically clock it down to match any slower installed modules.

How can I confirm the upgrade is recognised after installation?

Power on the terminal and check the BIOS or operating-system memory information — it should show an 8 GB DDR3-1333 module at 1.35 V.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.