Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips on both sides, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2133MHz CL15 1.2V 288-Pin UDIMM memory upgrade

SKU CH-RZ60-T2D9J

8 GB DDR4 UDIMM at 2133 MHz CL15 1.20 V, 288-pin, for Supermicro systems

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB DDR4 capacity expands workstation memory headroom
  • 2133 MHz DDR4 speed matches PC4-17000 bandwidth rating
  • CL15 CAS latency delivers responsive data access timing
  • 2 V low-voltage operation reduces power draw per module
  • 288-pin UDIMM form factor fits standard DDR4 desktop slots

Targeted Server Upgrade

This NEMIX RAM module provides an 8GB DDR4 2133MHz memory upgrade built for Supermicro workstations and servers. It matches the SuperMicro MEM-DR480L-SL01-UN21 specification so IT teams can expand capacity without compatibility guesswork. The non-ECC unbuffered design suits platforms that do not require error correction or registered signalling. Buyers who need ECC protection or registered DIMMs for their specific platform cannot use this module.

Standard UDIMM Build

The stick uses a plain 288-pin UDIMM form factor with no heat spreader, keeping the profile low for dense server chassis. Major OEM chips from Samsung Micron or Hynix are assembled on a single-rank 1Rx8 layout running at 1.20V. Each unit is stress tested under load before it ships. Builders who need a heat spreader for thermal headroom or a different rank configuration for their motherboard topology should look elsewhere.

Ready-to-Install Kit

The package contains one 8GB DDR4 2133MHz CL15 UDIMM and nothing else, so the installer only needs a compatible DIMM slot and a few minutes. NEMIX RAM backs the module with a lifetime replacement warranty and US-based IT support for troubleshooting. Customers who want bundled software tools or additional accessories will not find them here.

Pluspunten

  • 8 GB DDR4 capacity expands workstation memory headroom
  • 2133 MHz DDR4 speed matches PC4-17000 bandwidth rating
  • CL15 CAS latency delivers responsive data access timing
  • 2 V low-voltage operation reduces power draw per module
  • 288-pin UDIMM form factor fits standard DDR4 desktop slots

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-818K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

Vragen over dit artikel

What speed does the DDR4 2133 PC4-17000 interface actually run at?

The module runs at 2133 MT/s, which is the PC4-17000 data rate.

Will the 288-pin UDIMM fit my Supermicro workstation DIMM slots?

Yes, the 288-pin DDR4 UDIMM form factor matches standard Supermicro DDR4 DIMM slots.

How do I install the 1Rx8 CL15 stick, and what step is often missed?

Align the notch, press firmly until both side clips click, then verify 2133 MT/s in BIOS.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.