暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips on both sides, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2133MHz CL15 1.2V 288-Pin UDIMM memory upgrade

SKU CH-RZ60-T2D9J

8 GB DDR4 UDIMM at 2133 MHz CL15 1.20 V, 288-pin, for Supermicro systems

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB DDR4 capacity expands workstation memory headroom
  • 2133 MHz DDR4 speed matches PC4-17000 bandwidth rating
  • CL15 CAS latency delivers responsive data access timing
  • 2 V low-voltage operation reduces power draw per module
  • 288-pin UDIMM form factor fits standard DDR4 desktop slots

Targeted Server Upgrade

This NEMIX RAM module provides an 8GB DDR4 2133MHz memory upgrade built for Supermicro workstations and servers. It matches the SuperMicro MEM-DR480L-SL01-UN21 specification so IT teams can expand capacity without compatibility guesswork. The non-ECC unbuffered design suits platforms that do not require error correction or registered signalling. Buyers who need ECC protection or registered DIMMs for their specific platform cannot use this module.

Standard UDIMM Build

The stick uses a plain 288-pin UDIMM form factor with no heat spreader, keeping the profile low for dense server chassis. Major OEM chips from Samsung Micron or Hynix are assembled on a single-rank 1Rx8 layout running at 1.20V. Each unit is stress tested under load before it ships. Builders who need a heat spreader for thermal headroom or a different rank configuration for their motherboard topology should look elsewhere.

Ready-to-Install Kit

The package contains one 8GB DDR4 2133MHz CL15 UDIMM and nothing else, so the installer only needs a compatible DIMM slot and a few minutes. NEMIX RAM backs the module with a lifetime replacement warranty and US-based IT support for troubleshooting. Customers who want bundled software tools or additional accessories will not find them here.

特長

  • 8 GB DDR4 capacity expands workstation memory headroom
  • 2133 MHz DDR4 speed matches PC4-17000 bandwidth rating
  • CL15 CAS latency delivers responsive data access timing
  • 2 V low-voltage operation reduces power draw per module
  • 288-pin UDIMM form factor fits standard DDR4 desktop slots

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-818K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

この商品に関する質問

What speed does the DDR4 2133 PC4-17000 interface actually run at?

The module runs at 2133 MT/s, which is the PC4-17000 data rate.

Will the 288-pin UDIMM fit my Supermicro workstation DIMM slots?

Yes, the 288-pin DDR4 UDIMM form factor matches standard Supermicro DDR4 DIMM slots.

How do I install the 1Rx8 CL15 stick, and what step is often missed?

Align the notch, press firmly until both side clips click, then verify 2133 MT/s in BIOS.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。