eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
US$ 25,99
0.00033339BTC
Op voorraad
NEMIX RAM
NEMIX RAM 8GB DDR4 2666 CL19 SODIMM POSIFLEX XT-4015-G2 memory upgrade
8GB DDR4 2666 SODIMM for POSIFLEX XT-4015-G2, CL19 1.2V non-ECC upgrade
- Capacity8GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity expands POS terminal multitasking headroom
- DDR4 2666 speed matches POSIFLEX XT-4015-G2 memory bus
- CL19 latency keeps transaction processing responsive
- 20 V low voltage reduces terminal power draw
- 260-pin SODIMM form factor fits the kiosk motherboard slot
POSIFLEX XT-4015-G2 memory upgrade
This 8GB DDR4 SODIMM is built specifically for the POSIFLEX XT-4015-G2 JIVA foldable 15-inch terminal. It targets IT teams maintaining point-of-sale kiosks that need a reliable, system-matched module. The single 8GB stick fits the platform's memory slot without configuration guesswork.
260-pin unbuffered non-ECC build
The module uses major OEM chips from Samsung, Micron or Hynix on a standard 260-pin SODIMM PCB with no heat spreader. It runs at 1.2V and carries a CL19 latency at 2666 MT/s. The unbuffered, non-ECC design matches the terminal's motherboard requirements for direct, low-latency operation.
Replaces slower or smaller DDR4 SODIMMs
Upgrading from a 4GB stick or a lower-speed DDR4 module adds capacity and bandwidth for multi-tasking POS workloads. The jump is worth it when the terminal shows memory pressure during peak transaction periods or when the original module has reached end of life.
Pluspunten
- 8 GB capacity expands POS terminal multitasking headroom
- DDR4 2666 speed matches POSIFLEX XT-4015-G2 memory bus
- CL19 latency keeps transaction processing responsive
- 20 V low voltage reduces terminal power draw
- 260-pin SODIMM form factor fits the kiosk motherboard slot
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM |
Vragen over dit artikel
Does the DDR4 2666 interface cap at PC4-21300 bandwidth in the POSIFLEX XT-4015-G2?
Yes, the module runs at DDR4 2666 and is rated PC4-21300, so the interface tops out at that transfer rate in the terminal.
Will the 260-pin SODIMM fit the JIVA Foldable 15 Terminal memory slot?
The stick is a standard 260-pin DDR4 SODIMM, which matches the slot used in the POSIFLEX XT-4015-G2 and JIVA Foldable 15 Terminal.
How do I install the module, and what step is often missed?
Power off the terminal, open the memory cover, insert the SODIMM at an angle until the gold contacts disappear, then press down until the side clips click — many forget to seat it fully before locking.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
US$ 32,99
0.00042318BTC
Op voorraad
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
US$ 23,99
0.00030773BTC
Op voorraad
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
US$ 21,99
0.00028208BTC
Op voorraad