Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4-2933 CL21 1Rx8 UDIMM memory upgrade for Supermicro X12SCZ-F/TLN4F

SKU CH-4VMN-0K0KG

An 8 GB DDR4-2933 UDIMM with CL21 timing and 1.2 V operation, built from major OEM chips for verified fit in Supermicro X12SCZ-F and TLN4F motherboards

  • Capacity8GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 8GB DDR4-2933 capacity for smooth multitasking
  • CL21 latency for responsive system operation
  • 2V low voltage reduces power consumption
  • 288-pin UDIMM form factor fits Supermicro X12SCZ-F/TLN4F
  • Major OEM chips ensure reliable stability

8 GB DDR4-2933 UDIMM for Supermicro X12SCZ-F/TLN4F

This 8 GB DDR4-2933 (PC4-23400) UDIMM is built for the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards. It runs at 1.2 V with CL21 latency in a 1Rx8 unbuffered non-ECC layout. The 288-pin module uses major OEM chips and installs directly into the desktop DIMM slots.

Who this fits and who it does not

Suits owners of the listed Supermicro boards needing a single 8 GB stick that matches the board's exact rank, voltage and timing rules. Not for systems that require ECC registered modules, SODIMM form factors, or speeds other than DDR4-2933.

The deciding specification

The 1Rx8 unbuffered non-ECC organisation at DDR4-2933 CL21 1.2 V is the single spec that determines compatibility. If your manual calls for a different rank structure, ECC, registered buffering or another speed grade, this module will not work.

Pluspunten

  • 8GB DDR4-2933 capacity for smooth multitasking
  • CL21 latency for responsive system operation
  • 2V low voltage reduces power consumption
  • 288-pin UDIMM form factor fits Supermicro X12SCZ-F/TLN4F
  • Major OEM chips ensure reliable stability

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K1
Capacity8GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Vragen over dit artikel

What motherboard must I already have for this NEMIX RAM 8GB DDR4-2933 module to be recognised at full capacity?

The module is an exact-match upgrade for the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards, using the 288-pin UDIMM form factor those boards require.

Will this CL21 1.20V DDR4 DIMM run reliably alongside any existing memory I keep in the Supermicro board?

Yes — it uses major OEM chips (Samsung, Micron or Hynix) tested for stability at the rated 2933 MHz, CL21 timing and 1.20 V, matching the board's memory-population rules.

How can I confirm the kit is operating at its rated DDR4-2933 speed after installation?

Check the BIOS or a system-information utility; it should report the memory running at 2933 MHz (PC4-23400) with CL21 latency at 1.20 V.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.