نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4-2933 CL21 1Rx8 UDIMM memory upgrade for Supermicro X12SCZ-F/TLN4F

SKU CH-4VMN-0K0KG

An 8 GB DDR4-2933 UDIMM with CL21 timing and 1.2 V operation, built from major OEM chips for verified fit in Supermicro X12SCZ-F and TLN4F motherboards

  • Capacity8GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 8GB DDR4-2933 capacity for smooth multitasking
  • CL21 latency for responsive system operation
  • 2V low voltage reduces power consumption
  • 288-pin UDIMM form factor fits Supermicro X12SCZ-F/TLN4F
  • Major OEM chips ensure reliable stability

8 GB DDR4-2933 UDIMM for Supermicro X12SCZ-F/TLN4F

This 8 GB DDR4-2933 (PC4-23400) UDIMM is built for the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards. It runs at 1.2 V with CL21 latency in a 1Rx8 unbuffered non-ECC layout. The 288-pin module uses major OEM chips and installs directly into the desktop DIMM slots.

Who this fits and who it does not

Suits owners of the listed Supermicro boards needing a single 8 GB stick that matches the board's exact rank, voltage and timing rules. Not for systems that require ECC registered modules, SODIMM form factors, or speeds other than DDR4-2933.

The deciding specification

The 1Rx8 unbuffered non-ECC organisation at DDR4-2933 CL21 1.2 V is the single spec that determines compatibility. If your manual calls for a different rank structure, ECC, registered buffering or another speed grade, this module will not work.

أبرز المميزات

  • 8GB DDR4-2933 capacity for smooth multitasking
  • CL21 latency for responsive system operation
  • 2V low voltage reduces power consumption
  • 288-pin UDIMM form factor fits Supermicro X12SCZ-F/TLN4F
  • Major OEM chips ensure reliable stability

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K1
Capacity8GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

أسئلة حول هذا المنتج

What motherboard must I already have for this NEMIX RAM 8GB DDR4-2933 module to be recognised at full capacity?

The module is an exact-match upgrade for the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards, using the 288-pin UDIMM form factor those boards require.

Will this CL21 1.20V DDR4 DIMM run reliably alongside any existing memory I keep in the Supermicro board?

Yes — it uses major OEM chips (Samsung, Micron or Hynix) tested for stability at the rated 2933 MHz, CL21 timing and 1.20 V, matching the board's memory-population rules.

How can I confirm the kit is operating at its rated DDR4-2933 speed after installation?

Check the BIOS or a system-information utility; it should report the memory running at 2933 MHz (PC4-23400) with CL21 latency at 1.20 V.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.