BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00276429BTC
Op voorraad
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 1Rx8 UDIMM ASRock B450M-HDV R4.0 memory upgrade
An 8 GB DDR4 3200 UDIMM with CL22 timing, 1.2 V operation and 288-pin layout, validated for ASRock B450M-HDV R4.0 motherboards
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 3200 boosts desktop responsiveness
- CL22 latency at 1.2V keeps power draw low
- 1Rx8 single-rank layout simplifies compatibility
- 288-pin UDIMM fits ASRock B450M-HDV R4.0 slots
- Major OEM Samsung Micron Hynix chips ensure reliability
NEMIX RAM 8GB DDR4 3200 UDIMM
This 8GB DDR4 module runs at 3200MHz with CL22 latency and 1.2V operation. It is built as a 1Rx8 unbuffered non-ECC UDIMM using major brand chips. The 288-pin form factor fits standard desktop DIMM slots. It targets owners of the ASRock B450M-HDV R4.0 motherboard seeking a straightforward capacity increase.
Compatibility and use-case fit
The module is validated for the ASRock B450M-HDV R4.0 platform, making it a direct drop-in upgrade for that board. Builders using a different motherboard or needing ECC error correction should look elsewhere. Systems requiring registered or buffered memory cannot use this unbuffered stick. Users wanting higher frequencies or lower latencies will need a different specification.
Deciding specification: DDR4 3200 CL22 1Rx8
The speed grade of DDR4 3200 (PC4-25600) combined with CL22 timing and single-rank 1Rx8 organisation determines whether the memory matches the motherboard's supported profile. If the board's qualified vendor list calls for this exact speed and latency, the module will run without manual tuning. A different speed, rank count or voltage would require verification before purchase.
Pluspunten
- 8GB DDR4 3200 boosts desktop responsiveness
- CL22 latency at 1.2V keeps power draw low
- 1Rx8 single-rank layout simplifies compatibility
- 288-pin UDIMM fits ASRock B450M-HDV R4.0 slots
- Major OEM Samsung Micron Hynix chips ensure reliability
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Vragen over dit artikel
Is the single 8GB DDR4 3200 module enough or should I add a second stick later?
The module provides 8GB at 3200MT/s with CL22 latency; adding a second identical stick would enable dual-channel bandwidth on the ASRock B450M-HDV R4.0 board.
Will the 3200MT/s rating actually run at that speed on my B450M-HDV R4.0?
The board supports DDR4 3200, so the module will operate at its rated 3200MT/s CL22 1.20V without manual tuning.
Does the 288-pin DDR4 UDIMM fit the memory slots on the ASRock B450M-HDV R4.0?
Yes — the 288-pin unbuffered non-ECC UDIMM matches the desktop DIMM slots on that motherboard.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00279001BTC
Op voorraad
