We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 1Rx8 UDIMM ASRock B450M-HDV R4.0 memory upgrade

SKU CH-ZVEN-9EVCS

An 8 GB DDR4 3200 UDIMM with CL22 timing, 1.2 V operation and 288-pin layout, validated for ASRock B450M-HDV R4.0 motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 3200 boosts desktop responsiveness
  • CL22 latency at 1.2V keeps power draw low
  • 1Rx8 single-rank layout simplifies compatibility
  • 288-pin UDIMM fits ASRock B450M-HDV R4.0 slots
  • Major OEM Samsung Micron Hynix chips ensure reliability

NEMIX RAM 8GB DDR4 3200 UDIMM

This 8GB DDR4 module runs at 3200MHz with CL22 latency and 1.2V operation. It is built as a 1Rx8 unbuffered non-ECC UDIMM using major brand chips. The 288-pin form factor fits standard desktop DIMM slots. It targets owners of the ASRock B450M-HDV R4.0 motherboard seeking a straightforward capacity increase.

Compatibility and use-case fit

The module is validated for the ASRock B450M-HDV R4.0 platform, making it a direct drop-in upgrade for that board. Builders using a different motherboard or needing ECC error correction should look elsewhere. Systems requiring registered or buffered memory cannot use this unbuffered stick. Users wanting higher frequencies or lower latencies will need a different specification.

Deciding specification: DDR4 3200 CL22 1Rx8

The speed grade of DDR4 3200 (PC4-25600) combined with CL22 timing and single-rank 1Rx8 organisation determines whether the memory matches the motherboard's supported profile. If the board's qualified vendor list calls for this exact speed and latency, the module will run without manual tuning. A different speed, rank count or voltage would require verification before purchase.

Highlights

  • 8GB DDR4 3200 boosts desktop responsiveness
  • CL22 latency at 1.2V keeps power draw low
  • 1Rx8 single-rank layout simplifies compatibility
  • 288-pin UDIMM fits ASRock B450M-HDV R4.0 slots
  • Major OEM Samsung Micron Hynix chips ensure reliability

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Is the single 8GB DDR4 3200 module enough or should I add a second stick later?

The module provides 8GB at 3200MT/s with CL22 latency; adding a second identical stick would enable dual-channel bandwidth on the ASRock B450M-HDV R4.0 board.

Will the 3200MT/s rating actually run at that speed on my B450M-HDV R4.0?

The board supports DDR4 3200, so the module will operate at its rated 3200MT/s CL22 1.20V without manual tuning.

Does the 288-pin DDR4 UDIMM fit the memory slots on the ASRock B450M-HDV R4.0?

Yes — the 288-pin unbuffered non-ECC UDIMM matches the desktop DIMM slots on that motherboard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.