Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 96GB 6x16GB CL40 1.1V H14DSG-OD memory upgrade

SKU CH-PCCM-7XBA9

A 96GB kit of six 16GB DDR5 4800 ECC registered DIMMs at 1.1V CL40, validated for the Supermicro H14DSG-OD motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Nog 30 configuraties tonen
  • 96 GB total capacity from six 16 GB modules
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • ECC and registered design prevents silent data corruption
  • Exact-match kit validated for Supermicro H14DSG-OD motherboard
  • 288-pin RDIMM form factor fits required server slots

96GB DDR5-4800 ECC RDIMM kit

This 96GB kit contains six 16GB DDR5-4800 registered ECC RDIMMs built for the Supermicro H14DSG-OD motherboard. Each module runs at 1.1V with CL40 timing and a 1Rx8 organisation. The 288-pin form factor matches the board's DIMM slots exactly.

Suits servers needing registered ECC memory.

Registered ECC RDIMMs are required for multi-socket server platforms that rely on buffered architecture and error correction. Standard desktop motherboards cannot use registered modules and will not post with this kit installed.

288-pin RDIMM form factor decides fit

The Supermicro H14DSG-OD only accepts 288-pin registered DDR5 DIMMs. UDIMM or SODIMM variants are physically and electrically incompatible, so the registered RDIMM form factor is the single specification that determines whether this kit will work.

Pluspunten

  • 96 GB total capacity from six 16 GB modules
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • ECC and registered design prevents silent data corruption
  • Exact-match kit validated for Supermicro H14DSG-OD motherboard
  • 288-pin RDIMM form factor fits required server slots

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 6x16GB DDR5 4800 kit install cleanly alongside existing registered ECC modules on a Supermicro H14DSG-OD?

The kit matches the board's required 288-pin RDIMM form factor, 1.1V voltage, CL40 timing and 1Rx8 rank, so it will be recognised at full 96GB capacity and run at DDR5 4800 speed when populated per the manual.

How can I verify the 96GB DDR5 4800 kit is running at its rated 4800 MT/s with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to confirm each slot shows 16GB DDR5 4800, 1Rx8 Registered ECC, 1.1V and CL40, and that the memory controller reports ECC enabled.

Does the 96GB 6x16GB DDR5 4800 RDIMM kit include heat spreaders or any extra cables?

The package contains only the six 16GB 288-pin RDIMM modules; no heat spreaders, cables or additional accessories are included.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.