Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 128GB (4×32GB) CL40 1.1V 2Rx8 Supermicro H14DSG-O-CPU memory upgrade

SKU CH-M8YY-GH6K3

128 GB DDR5 registered ECC kit (four 32 GB modules) at 4800 MHz, CL40, 1.1 V, 288-pin RDIMM validated for Supermicro H14DSG-O-CPU

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Nog 30 configuraties tonen
  • 128 GB capacity across four 32 GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches the motherboard's DDR5 power specification
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU memory slots

Server DDR5 4800 ECC RDIMM kit

This 128 GB kit contains four 32 GB DDR5 4800 modules built to PC5-38400 with CL40 timing at 1.10 V. Registered ECC architecture and 2Rx8 organisation match the Supermicro H14DSG-O-CPU motherboard population rules for full-capacity operation.

Builders who need Registered ECC for this board

Buyers needing unbuffered UDIMM or laptop SODIMM form factors cannot use this kit. Systems limited to lower speeds or different voltage requirements should look elsewhere.

DDR5 4800 CL40 1.10 V spec

The DDR5 4800 CL40 1.10 V rating decides whether this kit runs at its rated speed on the H14DSG-O-CPU. Verify the manual for supported population order and maximum capacity per channel before installation.

Pluspunten

  • 128 GB capacity across four 32 GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches the motherboard's DDR5 power specification
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-O-CPU memory slots

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 288-pin RDIMM modules fit the Supermicro H14DSG-O-CPU DIMM slots?

Yes, the 288-pin Registered DDR5 form factor matches the board's RDIMM slots exactly; UDIMM or SODIMM modules would not seat.

What population order should I follow when installing the four 32 GB sticks?

Install modules in the sequence shown in the Supermicro H14DSG-O-CPU manual so the memory controller recognises the full 128 GB at DDR5-4800.

How do I know if a module needs replacement later?

ECC corrects single-bit errors on the fly; persistent corrected-error logs or uncorrectable errors reported by the OS indicate a stick should be swapped.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.