Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM DDR5 5600 256GB (2x128GB) ECC Registered RDIMM Supermicro H14SSF memory upgrade

SKU CH-17QE-Z9ZK9

A 256GB DDR5 5600 ECC Registered RDIMM kit built for the Supermicro H14SSF, delivering 1.1V CL46 stability across two 128GB modules

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity lets you run memory-heavy workloads with 2×128 GB modules
  • DDR5 5600 speed delivers rated bandwidth at PC5-44800
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at CL46 matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor fits the Supermicro H14SSF motherboard's memory slots

System-Specific DDR5 Kit

This 256 GB kit contains two 128 GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H14SSF motherboard. It targets administrators who need to populate every slot with the exact rank, voltage and timing the board expects.

Registered ECC Architecture

Registered buffering offloads the memory controller so all slots run fully populated at the rated 5600 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Sustained Enterprise Load

The 1.10 V operating voltage and CL46 latency are specified for continuous server workloads rather than short bursts, keeping signal integrity stable across long-running production tasks.

Pluspunten

  • 256 GB total capacity lets you run memory-heavy workloads with 2×128 GB modules
  • DDR5 5600 speed delivers rated bandwidth at PC5-44800
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at CL46 matches the board's exact voltage and timing requirements
  • 288-pin RDIMM form factor fits the Supermicro H14SSF motherboard's memory slots

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What does the 5600 MHz rating mean once the kit is installed in a Supermicro H14SSF?

The modules will run at DDR5 5600 (PC5-44800) at the rated CL46 latency and 1.10 V, provided the motherboard populates the slots according to its validated sequence.

How does the 288-pin RDIMM interface limit or enable capacity on this board?

The 288-pin Registered DIMM form factor is the only type the H14SSF accepts; it allows the two 128 GB modules to be recognised at full 256 GB capacity when installed in the correct slot order.

What physical clearance does the 288-pin RDIMM need to seat in the H14SSF?

Standard 288-pin DDR5 RDIMM height fits the H14SSF DIMM slots; the kit has no heat spreader, so it clears typical CPU coolers and chassis lids without extra space.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.