Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 25mm square fan with two wires

OEM Industries

OEM Industries DFB251005L 25mm 12V 2-Wire Ball Bearing Fan

SKU CH-YWG7-32PE8

A 25 mm ball-bearing fan runs on 12 V at 0.04 A and 0.5 W with a two-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size25mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • Compact 25 mm frame fits tight chipset or drive bays
  • Ball bearing ensures long-life, low-friction rotation
  • 12 V, 0.04 A draw keeps power use minimal
  • 5 W rating suits low-heat component cooling
  • Two-wire lead simplifies direct board connection

Compact 25mm Cooling Fan

The OEM Industries DFB251005L is a 25mm square fan that runs on 12V DC and draws 0.04A for a rated 0.5W. It uses a two-wire power connector and a ball bearing for continuous operation in tight spaces such as chipset heatsinks or hard-drive brackets.

Ideal for Small-Form-Factor Repairs

This unit suits technicians replacing a noisy or failed 25mm fan on a motherboard chipset, a RAID card or a compact storage enclosure. Builders who need PWM speed control, a three- or four-pin header, or higher airflow for a CPU tower should look elsewhere.

Simple Two-Wire Installation

Connect the red and black leads to a 12V source or a two-pin header; polarity must be observed to avoid damage. The tiny frame leaves little room for error, so verify the mounting hole pattern and clearance before ordering.

Pluspunten

  • Compact 25 mm frame fits tight chipset or drive bays
  • Ball bearing ensures long-life, low-friction rotation
  • 12 V, 0.04 A draw keeps power use minimal
  • 5 W rating suits low-heat component cooling
  • Two-wire lead simplifies direct board connection

Specificaties

ModelDFB251005L
ColorBlack
TypeFan only
Fan Size25mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Vragen over dit artikel

Does this 25 mm fan need a 12 V header or a separate 12 V supply?

It runs on 12 V DC at .04 A, so a standard 12 V fan header or equivalent 12 V source is required.

Will the 2-wire connector work with a motherboard header that expects a 3- or 4-pin PWM fan?

The fan has only two wires for power; it will spin at full speed on a 3- or 4-pin header but cannot report RPM or accept PWM control.

How can I confirm the ball-bearing fan is running correctly after installing it on a chipset or hard-drive bracket?

Listen for smooth, steady airflow at 12 V; the ball bearing should run quietly without rattling, and the .5 W draw matches the spec.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.