Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 60mm square Maglev cooling fan with three-wire connector

OEM Industries

OEM Industries ME60151V3-0000-G99 60mm Maglev 12V 0.9W 3 Pin Fan

SKU CH-AD6D-QAEEH

A 60 mm maglev fan delivering 12 V, 0.9 W cooling in a 15 mm thick frame with a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.9 W draw keeps power use low
  • 60 mm frame fits compact CPU coolers
  • 3 pin connector enables direct motherboard control
  • Black finish matches stealth builds

60 mm Maglev CPU Cooler Fan

This 60 mm fan uses magnetic-levitation bearings and a three-pin 12 V connection to cool compact CPU air coolers. It draws 0.9 W and fits the 6015 form factor for tight build spaces.

Sustained Load Behaviour

The maglev bearing reduces friction so rotational speed stays consistent during long workloads. Low power draw limits heat added to the chassis while maintaining steady airflow over time.

Build and Connector Notes

Black plastic frame measures 60 by 60 by 15 mm with no LED lighting. Three-wire connector provides tachometer feedback for motherboard monitoring and simple mounting in standard 60 mm fan slots.

Pluspunten

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.9 W draw keeps power use low
  • 60 mm frame fits compact CPU coolers
  • 3 pin connector enables direct motherboard control
  • Black finish matches stealth builds

Specificaties

ModelME60151V3-0000-G99
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Vragen over dit artikel

How much power does the 12V Maglev fan draw when running continuously?

The fan is rated at 0.9W at 12V, so it draws very little power even when spinning all day.

Does the 3-pin connector need a specific header on my motherboard?

It plugs into any standard 3-pin fan header; the board supplies 12V and reads the tachometer signal.

Will the 60mm frame fit the mounting holes on my older heatsink?

The fan measures 60mm square by 15mm thick, matching the common 6015 mounting pattern used on many legacy coolers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.