Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3 RDIMM modules in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM Kit

SKU CH-TD70-PVTMV

A 32 GB kit of four 8 GB DDR3-1333 ECC registered RDIMMs validated for HP ProLiant SL160z G6, SL170z G6 and SL2x170z G6 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualization
  • DDR3 1333 CL9 matches HP ProLiant SL160z G6, SL170z G6, SL2x170z G6 specifications
  • 5 V 240-pin RDIMM installs directly into supported HP ProLiant slots
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA, FX622UT

Server ECC RDIMM kit

This 32 GB kit contains four 8 GB DDR3 1333 PC3-10600 CL9 registered ECC modules. It is built for HP ProLiant SL160z G6, SL170z G6 and SL2x170z G6 servers that require registered memory with error correction. Standard desktop boards cannot use these modules and they must not be mixed with unbuffered DIMMs.

240-pin DDR3 registered layout

Each module uses a 240-pin DDR3 interface at 1.5 V with a 2Rx4 organisation. The registered buffer reduces electrical load on the server memory controller, allowing the full kit to populate four slots. No heat spreaders are fitted, so airflow across the DIMMs must be provided by the chassis fans.

JEDEC DDR3 thermals and power

The modules operate at the standard 1.5 V DDR3 voltage defined by JEDEC specifications. Without heat spreaders the DRAM runs at the rated CAS 9 latency within normal server inlet temperatures. Registered buffering keeps signal integrity stable under sustained multi-threaded workloads.

Pluspunten

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualization
  • DDR3 1333 CL9 matches HP ProLiant SL160z G6, SL170z G6, SL2x170z G6 specifications
  • 5 V 240-pin RDIMM installs directly into supported HP ProLiant slots
  • Replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, FX622AA, FX622UT

Specificaties

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant SL160z G6
HP ProLiant SL170z G6
HP ProLiant SL2x170z G6

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the CL9 latency hold steady when the four modules run at 1333 MT/s all day?

The kit is rated CL9 at DDR3 1333 (PC3 10600); latency does not change under sustained load.

How much heat do the 1.5 V registered DIMMs produce in a fully populated server?

Each 8 GB module runs at 1.5 V with no heat spreader, so total power draw stays within standard DDR3 registered limits.

Which HP ProLiant models must I already own for this 32 GB kit to work?

The kit is validated for HP ProLiant SL160z G6, SL170z G6 and SL2x170z G6 servers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.