Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black DDR3 desktop DIMMs, 240-pin, no heat spreader

OWC

OWC 4GB (2x2GB) DDR3 1066 PC3-8500 CL7 1.5V UDIMM Kit

SKU CH-H45G-HGKX9

Dual-channel 4GB DDR3 kit running at 1066MHz with CL7 latency and 1.5V operation for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB (2 x 2GB)

  • Dual-channel kit doubles bandwidth for multitasking with two matched 2 GB modules
  • CL7 latency at 1066 MHz delivers snappy response in everyday desktop workloads
  • 5 V JEDEC voltage ensures broad compatibility with standard desktop boards
  • Unbuffered non-ECC design keeps installation simple for DIY upgrades
  • 240-pin UDIMM form factor fits mainstream desktop memory slots

DDR3 1066 desktop kit

This OWC kit supplies 4GB of DDR3 memory as two 2GB unbuffered UDIMMs rated at 1066MHz with CL7 latency and 1.5V operation. The modules follow JEDEC PC3-8500 specifications and use standard 240-pin connectors for desktop platforms.

Fits older DDR3 systems

The kit suits desktops and workstations that accept DDR3 1066 unbuffered non-ECC DIMMs and have two available slots for dual-channel population. Systems requiring ECC, registered modules, higher speeds or different voltages should use other memory.

Steady throughput at rated speed

Under sustained load the modules maintain their 1066MHz data rate and CL7 timing at 1.5V without a heat spreader. The JEDEC-compliant design keeps performance consistent during extended multitasking or large-file workloads.

Pluspunten

  • Dual-channel kit doubles bandwidth for multitasking with two matched 2 GB modules
  • CL7 latency at 1066 MHz delivers snappy response in everyday desktop workloads
  • 5 V JEDEC voltage ensures broad compatibility with standard desktop boards
  • Unbuffered non-ECC design keeps installation simple for DIY upgrades
  • 240-pin UDIMM form factor fits mainstream desktop memory slots

Specificaties

BrandOWC
Part Number8U5D31R8004P
Capacity4GB (2 x 2GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What motherboard slot does this 240-pin DDR3 kit require?

The modules fit a standard DDR3 240-pin UDIMM slot running at 1.5V.

Can I mix these CL7 1066MHz sticks with slower DDR3 already in my PC?

Yes, the system will run all modules at the speed of the slowest installed kit.

How do I confirm the dual-channel kit is active after install?

Check the BIOS or OS memory report; it should show 4GB total at 1066MHz in dual-channel mode.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.