เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

OWC

OWC 4GB (2x2GB) DDR3 1066 PC3-8500 CL7 1.5V UDIMM Kit

SKU CH-H45G-HGKX9

Dual-channel 4GB DDR3 kit running at 1066MHz with CL7 latency and 1.5V operation for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Dual-channel kit doubles bandwidth for multitasking with two matched 2 GB modules
  • CL7 latency at 1066 MHz delivers snappy response in everyday desktop workloads
  • 5 V JEDEC voltage ensures broad compatibility with standard desktop boards
  • Unbuffered non-ECC design keeps installation simple for DIY upgrades
  • 240-pin UDIMM form factor fits mainstream desktop memory slots

DDR3 1066 desktop kit

This OWC kit supplies 4GB of DDR3 memory as two 2GB unbuffered UDIMMs rated at 1066MHz with CL7 latency and 1.5V operation. The modules follow JEDEC PC3-8500 specifications and use standard 240-pin connectors for desktop platforms.

Fits older DDR3 systems

The kit suits desktops and workstations that accept DDR3 1066 unbuffered non-ECC DIMMs and have two available slots for dual-channel population. Systems requiring ECC, registered modules, higher speeds or different voltages should use other memory.

Steady throughput at rated speed

Under sustained load the modules maintain their 1066MHz data rate and CL7 timing at 1.5V without a heat spreader. The JEDEC-compliant design keeps performance consistent during extended multitasking or large-file workloads.

จุดเด่น

  • Dual-channel kit doubles bandwidth for multitasking with two matched 2 GB modules
  • CL7 latency at 1066 MHz delivers snappy response in everyday desktop workloads
  • 5 V JEDEC voltage ensures broad compatibility with standard desktop boards
  • Unbuffered non-ECC design keeps installation simple for DIY upgrades
  • 240-pin UDIMM form factor fits mainstream desktop memory slots

ข้อมูลจำเพาะ

BrandOWC
Part Number8U5D31R8004P
Capacity4GB (2 x 2GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

What motherboard slot does this 240-pin DDR3 kit require?

The modules fit a standard DDR3 240-pin UDIMM slot running at 1.5V.

Can I mix these CL7 1066MHz sticks with slower DDR3 already in my PC?

Yes, the system will run all modules at the speed of the slowest installed kit.

How do I confirm the dual-channel kit is active after install?

Check the BIOS or OS memory report; it should show 4GB total at 1066MHz in dual-channel mode.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที