OWC 16GB DDR4 3200MHz CL22 1RX8 SODIMM laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
An 8 GB DDR4 ECC SODIMM running at 2933 MHz CL21 with 1.2 V operation for laptops, NAS and micro servers
This 260-pin SO-DIMM delivers 8GB of DDR4 memory rated at 2933MHz with CL21 latency. It operates at 1.2V and includes on-die ECC for data integrity in compatible laptops, all-in-one PCs and NAS appliances. The unbuffered design keeps installation straightforward for most systems.
Rated to PC4-23400 specifications, the module maintains its 2933MHz transfer rate and CL21 timings under continuous load without exceeding the 1.2V envelope. JEDEC compliance means the SPD profiles are recognised by system firmware, so the memory runs at its rated speed without manual tuning. Error correction functions cycle after cycle during long compute or file-serving tasks.
The 260-pin DDR4 SO-DIMM form factor fits slots wired for 2133MHz, 2400MHz, 2666MHz or 2933MHz operation; the module will down-clock automatically to the highest speed the platform supports. ECC capability is only active when the CPU and chipset also implement ECC; otherwise the module runs as non-ECC memory. Capacity is fixed at 8GB per module.
| Brand | OWC |
|---|---|
| Part Number | 2C9D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The module operates at the standard DDR4 voltage of 1.2V, keeping power draw low during continuous use in laptops or NAS systems.
Yes, it requires a 260-pin DDR4 SO-DIMM slot; the system must support DDR4 ECC unbuffered memory at 2933MHz or lower speeds.
It is backwards compatible and will run at 2666MHz, 2400MHz or 2133MHz to match the system's maximum supported speed.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?