OWC 16GB DDR4 3200MHz CL22 1RX8 SODIMM laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
An 8 GB DDR4 ECC SODIMM running at 2933 MHz CL21 with 1.2 V operation for laptops, NAS and micro servers
This 260-pin SO-DIMM delivers 8GB of DDR4 memory rated at 2933MHz with CL21 latency. It operates at 1.2V and includes on-die ECC for data integrity in compatible laptops, all-in-one PCs and NAS appliances. The unbuffered design keeps installation straightforward for most systems.
Rated to PC4-23400 specifications, the module maintains its 2933MHz transfer rate and CL21 timings under continuous load without exceeding the 1.2V envelope. JEDEC compliance means the SPD profiles are recognised by system firmware, so the memory runs at its rated speed without manual tuning. Error correction functions cycle after cycle during long compute or file-serving tasks.
The 260-pin DDR4 SO-DIMM form factor fits slots wired for 2133MHz, 2400MHz, 2666MHz or 2933MHz operation; the module will down-clock automatically to the highest speed the platform supports. ECC capability is only active when the CPU and chipset also implement ECC; otherwise the module runs as non-ECC memory. Capacity is fixed at 8GB per module.
| Brand | OWC |
|---|---|
| Part Number | 2C9D41R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The module operates at the standard DDR4 voltage of 1.2V, keeping power draw low during continuous use in laptops or NAS systems.
Yes, it requires a 260-pin DDR4 SO-DIMM slot; the system must support DDR4 ECC unbuffered memory at 2933MHz or lower speeds.
It is backwards compatible and will run at 2666MHz, 2400MHz or 2133MHz to match the system's maximum supported speed.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?