Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black metal bracket kit converting a 3.5 inch bay to hold two 2.5 inch drives

Sabrent

Sabrent 2.5 to 3.5 inch HDD Mounting Kit BK-HDDH

SKU CH-F62A-NRZ2Q

Converts a 3.5" drive bay to hold two 2.5" HDDs or SSDs using robust SECC steel

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • Compatible Products3.5"
  • SpecificationsSupports any computer cases with an available 3.5" drive bay
  • Features2.5" Solid State Drives (SSDs) or Hard Disk Drives offer man
  • Package ContentsSabrent Mounting Bracket Kit Bag of screws

Model Brackets Metal

  • Brackets Metal
  • Brackets Metal (Cables)

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Fits two 2.5" drives in a 3.5" bay
  • Works with screw-on or tool-less 3.5" bays
  • Built from robust SECC steel for strength
  • Adds 2.5" SSD or HDD support to any case
  • Quick installation with included screws

Dual 2.5 to 3.5 drive bracket

This Sabrent mounting kit converts a single 3.5 inch drive bay into a slot for two 2.5 inch drives. It accepts both SSDs and mechanical hard disks. The bracket is aimed at system builders upgrading older cases that lack native 2.5 inch mounts.

Check bay type and screw holes

Verify that your chassis has a free 3.5 inch bay, either screw-on or tool-less, before ordering. The kit includes a bag of screws for securing the drives to the bracket. No additional mounting hardware is required beyond what the case already provides.

SECC steel construction and tool-less fit

The bracket is built from robust SECC steel for structural rigidity. Its design works with both traditional screw-on bays and tool-less mechanisms, so installation is quick regardless of case style. Two drives sit side by side, keeping cable routing straightforward.

Pluspunten

  • Fits two 2.5" drives in a 3.5" bay
  • Works with screw-on or tool-less 3.5" bays
  • Built from robust SECC steel for strength
  • Adds 2.5" SSD or HDD support to any case
  • Quick installation with included screws

Specificaties

BrandSabrent
ModelBrackets Metal
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
Compatible Products3.5"
SpecificationsSupports any computer cases with an available 3.5" drive bay (both screw-on type or tool-less type)
Converts an available 3.5" HDD bay drive to accommodate two 2.5" HDD or SSD (Solid State Drive)
Constructed from robust SECC steel to ensure maximum structural integrity.
Features2.5" Solid State Drives (SSDs) or Hard Disk Drives offer many benefits over larger 3.5" hard disk drives, such as lower heat output, faster speed (with SSD), and lower power consumption. But installing a new 2.5" SSD or HDD into an existing computer may not be possible due to lack of 2.5" bay drive support. The Sabrent 3.5" to 2.5" Bay Drive Converter Kit easily transforms any available 3.5" bay drive to accommodate up to two 2.5" hard disk drives or SSDs. The Converter Kit is designed to work with all types of computer cases (screw-on type or tool-less type), and can be installed qu
Package ContentsSabrent Mounting Bracket Kit
Bag of screws
Verzendgewicht0.66 kg
Pakketafmetingen160 × 107 × 25 mm

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.