暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black metal bracket kit converting a 3.5 inch bay to hold two 2.5 inch drives

Sabrent

Sabrent 2.5 to 3.5 inch HDD Mounting Kit BK-HDDH

SKU CH-F62A-NRZ2Q

Converts a 3.5" drive bay to hold two 2.5" HDDs or SSDs using robust SECC steel

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • Compatible Products3.5"
  • SpecificationsSupports any computer cases with an available 3.5" drive bay
  • Features2.5" Solid State Drives (SSDs) or Hard Disk Drives offer man
  • Package ContentsSabrent Mounting Bracket Kit Bag of screws

Model Brackets Metal

  • Brackets Metal
  • Brackets Metal (Cables)

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Fits two 2.5" drives in a 3.5" bay
  • Works with screw-on or tool-less 3.5" bays
  • Built from robust SECC steel for strength
  • Adds 2.5" SSD or HDD support to any case
  • Quick installation with included screws

Dual 2.5 to 3.5 drive bracket

This Sabrent mounting kit converts a single 3.5 inch drive bay into a slot for two 2.5 inch drives. It accepts both SSDs and mechanical hard disks. The bracket is aimed at system builders upgrading older cases that lack native 2.5 inch mounts.

Check bay type and screw holes

Verify that your chassis has a free 3.5 inch bay, either screw-on or tool-less, before ordering. The kit includes a bag of screws for securing the drives to the bracket. No additional mounting hardware is required beyond what the case already provides.

SECC steel construction and tool-less fit

The bracket is built from robust SECC steel for structural rigidity. Its design works with both traditional screw-on bays and tool-less mechanisms, so installation is quick regardless of case style. Two drives sit side by side, keeping cable routing straightforward.

特長

  • Fits two 2.5" drives in a 3.5" bay
  • Works with screw-on or tool-less 3.5" bays
  • Built from robust SECC steel for strength
  • Adds 2.5" SSD or HDD support to any case
  • Quick installation with included screws

仕様

BrandSabrent
ModelBrackets Metal
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
Compatible Products3.5"
SpecificationsSupports any computer cases with an available 3.5" drive bay (both screw-on type or tool-less type)
Converts an available 3.5" HDD bay drive to accommodate two 2.5" HDD or SSD (Solid State Drive)
Constructed from robust SECC steel to ensure maximum structural integrity.
Features2.5" Solid State Drives (SSDs) or Hard Disk Drives offer many benefits over larger 3.5" hard disk drives, such as lower heat output, faster speed (with SSD), and lower power consumption. But installing a new 2.5" SSD or HDD into an existing computer may not be possible due to lack of 2.5" bay drive support. The Sabrent 3.5" to 2.5" Bay Drive Converter Kit easily transforms any available 3.5" bay drive to accommodate up to two 2.5" hard disk drives or SSDs. The Converter Kit is designed to work with all types of computer cases (screw-on type or tool-less type), and can be installed qu
Package ContentsSabrent Mounting Bracket Kit
Bag of screws
配送重量0.66 kg
梱包サイズ160 × 107 × 25 mm

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。