Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Square 7 cm black blower fan with four-wire PWM connector

SXDOOL

SXDOOL FD7015H12D 12V 0.43A 7 cm case fan

SKU CH-R4EJ-CHKWV MPN FD7015H12D

A 7 cm blower fan with dual ball bearings delivers 10.75 CFM at up to 4800 RPM under 4-wire PWM control

  • Adjustable cooling with 1000–4800 RPM PWM control
  • Dual ball bearings rated for 80000 hours life
  • 75 CFM airflow at 4800 RPM peak speed
  • Operates from 10.8 V to 13.2 V range
  • 49 dBA noise at maximum 4800 RPM speed

12 V PWM case fan with dual ball bearing

The FD7015H12D is a 7 cm blower-style fan built for server and industrial chassis. It runs on 12 V DC with a 0.43 A draw and uses a four-wire PWM circuit for automatic speed control. Dual ball bearings support a rated life of 80,000 hours.

Suited for tight 1U or blade servers needing

This fan delivers 10.75 CFM at up to 4,800 RPM, making it appropriate for high-density enclosures where directed cooling is required. The 49 dBA noise level at maximum speed rules it out for quiet workstations or home-theatre PCs. Builders who need larger-diameter fans or lower acoustic profiles should consider other form factors.

4-wire PWM speed control from 1,000 to 4,800 RPM

The PWM interface lets the motherboard or fan controller vary speed between 1,000 and 4,800 RPM within a ±10 % tolerance. This range is the decisive specification: verify that your board supplies a standard PWM header and that the target component can operate within this speed window before purchasing.

Pluspunten

  • Adjustable cooling with 1000–4800 RPM PWM control
  • Dual ball bearings rated for 80000 hours life
  • 75 CFM airflow at 4800 RPM peak speed
  • Operates from 10.8 V to 13.2 V range
  • 49 dBA noise at maximum 4800 RPM speed

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Will this FD7015H12D blower fan fit the 4-pin PWM header on my current motherboard?

Yes, the fan uses a standard 4-wire PWM connector that plugs directly into any 4-pin CPU or chassis fan header supplying 12 V.

If I keep my existing 3-pin case fans on the same controller, will the FD7015H12D still respond to PWM signals independently?

The fan accepts PWM control from 1000 to 4800 RPM while 3-pin fans on the same controller run at fixed voltage; each header manages its own signal.

How can I confirm the FD7015H12D is running at its rated 10.75 CFM after installation?

At maximum PWM duty the fan should spin near 4800 RPM and produce 49 dBA; match those readings in BIOS or monitoring software to verify full airflow.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.