SXDOOL
SXDOOL FD7015H12D 12V 0.43A 7 cm case fan
A 7 cm blower fan with dual ball bearings delivers 10.75 CFM at up to 4800 RPM under 4-wire PWM control
- Adjustable cooling with 1000–4800 RPM PWM control
- Dual ball bearings rated for 80000 hours life
- 75 CFM airflow at 4800 RPM peak speed
- Operates from 10.8 V to 13.2 V range
- 49 dBA noise at maximum 4800 RPM speed
12 V PWM case fan with dual ball bearing
The FD7015H12D is a 7 cm blower-style fan built for server and industrial chassis. It runs on 12 V DC with a 0.43 A draw and uses a four-wire PWM circuit for automatic speed control. Dual ball bearings support a rated life of 80,000 hours.
Suited for tight 1U or blade servers needing
This fan delivers 10.75 CFM at up to 4,800 RPM, making it appropriate for high-density enclosures where directed cooling is required. The 49 dBA noise level at maximum speed rules it out for quiet workstations or home-theatre PCs. Builders who need larger-diameter fans or lower acoustic profiles should consider other form factors.
4-wire PWM speed control from 1,000 to 4,800 RPM
The PWM interface lets the motherboard or fan controller vary speed between 1,000 and 4,800 RPM within a ±10 % tolerance. This range is the decisive specification: verify that your board supplies a standard PWM header and that the target component can operate within this speed window before purchasing.
Najważniejsze cechy
- Adjustable cooling with 1000–4800 RPM PWM control
- Dual ball bearings rated for 80000 hours life
- 75 CFM airflow at 4800 RPM peak speed
- Operates from 10.8 V to 13.2 V range
- 49 dBA noise at maximum 4800 RPM speed
Specyfikacja
Na razie brak opublikowanej specyfikacji tego produktu.
Pytania dotyczące tego produktu
Will this FD7015H12D blower fan fit the 4-pin PWM header on my current motherboard?
Yes, the fan uses a standard 4-wire PWM connector that plugs directly into any 4-pin CPU or chassis fan header supplying 12 V.
If I keep my existing 3-pin case fans on the same controller, will the FD7015H12D still respond to PWM signals independently?
The fan accepts PWM control from 1000 to 4800 RPM while 3-pin fans on the same controller run at fixed voltage; each header manages its own signal.
How can I confirm the FD7015H12D is running at its rated 10.75 CFM after installation?
At maximum PWM duty the fan should spin near 4800 RPM and produce 49 dBA; match those readings in BIOS or monitoring software to verify full airflow.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



