Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black standalone SATA duplicator with five hot-swap drive slots and LCD screen

Systor

Systor SYS305DP 1:5 SATA Duplicator & Sanitizer 18GB/min 300MB/s 128MB Buffer

SKU CH-BDTM-DKX5X

Standalone SATA duplicator copies one drive to five targets at 18 GB per minute with DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 05

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Duplicates five drives simultaneously from one source
  • Copies at up to 300 MB per second
  • Meets DoD 5220.22-M sanitisation standard
  • Works with 2.5" and 3.5" drives without adapters
  • Standalone operation with LCD control panel

SATA Duplicator with 1:5 Target Ratio

The Systor SYS305DP is a standalone SATA duplicator and sanitizer that copies one source drive to up to five target drives simultaneously. It handles both 3.5 and 2.5 inch hard drives and solid-state drives without adapters. An LCD screen provides status feedback during operation. The unit runs independently of a host computer, drawing power from an internal 250 W supply rated for 115/230 V at 50/60 Hz.

Ideal for IT Departments and Data-Center Staging

This duplicator suits teams that need to deploy identical drive images across multiple SATA drives quickly, or that must sanitize retired media to the DoD 5220.22-M standard. It is not suited for workflows that require network-attached operation, drives with non-SATA connectors, or automated scripting via a host PC.

300 MB/s Maximum Transfer Rate

The peak data throughput of 300 MB/s (18.0 GB/min) determines how fast each target receives data during a copy session. A 128 MB buffer helps sustain this rate across all five ports. If your project demands higher per-port bandwidth or support for interfaces other than SATA, a different platform will be required.

Pluspunten

  • Duplicates five drives simultaneously from one source
  • Copies at up to 300 MB per second
  • Meets DoD 5220.22-M sanitisation standard
  • Works with 2.5" and 3.5" drives without adapters
  • Standalone operation with LCD control panel

Specificaties

BrandSystor
ModelSYS305DP
TypeHard Drive Duplicator
Target1 to 5
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How loud and hot does the duplicator get when running all day with five drives?

It uses 40 mm rear fans and a dedicated outtake fan on each of the five ports to maintain airflow during continuous operation.

What must I already own to start copying drives with this unit?

You need a source SATA drive and up to five target SATA drives; the duplicator works standalone with no computer or software required.

Will this duplicator work with the 3.5-inch and 2.5-inch SATA drives I already have?

Yes, it accepts both 3.5-inch and 2.5-inch SATA hard drives and SSDs directly without any adapters.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.