Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black standalone SATA duplicator with five hot-swap drive slots and LCD screen

Systor

Systor SYS305DP 1:5 SATA Duplicator & Sanitizer 18GB/min 300MB/s 128MB Buffer

SKU CH-BDTM-DKX5X

Standalone SATA duplicator copies one drive to five targets at 18 GB per minute with DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 05

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Duplicates five drives simultaneously from one source
  • Copies at up to 300 MB per second
  • Meets DoD 5220.22-M sanitisation standard
  • Works with 2.5" and 3.5" drives without adapters
  • Standalone operation with LCD control panel

SATA Duplicator with 1:5 Target Ratio

The Systor SYS305DP is a standalone SATA duplicator and sanitizer that copies one source drive to up to five target drives simultaneously. It handles both 3.5 and 2.5 inch hard drives and solid-state drives without adapters. An LCD screen provides status feedback during operation. The unit runs independently of a host computer, drawing power from an internal 250 W supply rated for 115/230 V at 50/60 Hz.

Ideal for IT Departments and Data-Center Staging

This duplicator suits teams that need to deploy identical drive images across multiple SATA drives quickly, or that must sanitize retired media to the DoD 5220.22-M standard. It is not suited for workflows that require network-attached operation, drives with non-SATA connectors, or automated scripting via a host PC.

300 MB/s Maximum Transfer Rate

The peak data throughput of 300 MB/s (18.0 GB/min) determines how fast each target receives data during a copy session. A 128 MB buffer helps sustain this rate across all five ports. If your project demands higher per-port bandwidth or support for interfaces other than SATA, a different platform will be required.

Najważniejsze cechy

  • Duplicates five drives simultaneously from one source
  • Copies at up to 300 MB per second
  • Meets DoD 5220.22-M sanitisation standard
  • Works with 2.5" and 3.5" drives without adapters
  • Standalone operation with LCD control panel

Specyfikacja

BrandSystor
ModelSYS305DP
TypeHard Drive Duplicator
Target1 to 5
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How loud and hot does the duplicator get when running all day with five drives?

It uses 40 mm rear fans and a dedicated outtake fan on each of the five ports to maintain airflow during continuous operation.

What must I already own to start copying drives with this unit?

You need a source SATA drive and up to five target SATA drives; the duplicator works standalone with no computer or software required.

Will this duplicator work with the 3.5-inch and 2.5-inch SATA drives I already have?

Yes, it accepts both 3.5-inch and 2.5-inch SATA hard drives and SSDs directly without any adapters.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.