Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black standalone SATA duplicator with nineteen front drive slots

Systor

Systor 1:19 SATA Duplicator & Sanitizer 36GB/min 600MB/sec SYS619DP

SKU CH-50GM-H4M9J

Duplicates up to 19 SATA drives at 36 GB/min with DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 19
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • Operating TypeStandalone
  • ConnectorSATA
  • Panel ColorBlack

TARGET SIZE 1 to 19

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copy 19 drives simultaneously at 36 GB/min
  • Standalone operation — no computer or software needed
  • Sanitise data to DoD 5220.22-M standard
  • Accepts 2.5″ and 3.5″ SATA drives without adapters
  • Slot-load bays with 40 mm cooling fans per port

Standalone SATA duplicator for 19 drives

The Systor SYS619DP is a standalone hard-drive duplicator and sanitizer that copies one SATA source to up to 19 targets at once. It handles 3.5-inch and 2.5-inch HDDs or SSDs without adapters and runs without a host computer or software. Transfer speeds reach 36.0 GB per minute (600 MB/sec). A 40 mm rear fan and per-port outtake fans keep drives cool during long jobs.

Suited for high-volume SATA cloning and DoD wiping

IT teams, data-centre operators and forensic labs that need to duplicate or erase many SATA drives simultaneously will benefit from the 1-to-19 target ratio and DoD 5220.22-M compliant sanitization. Users who require interfaces other than SATA, or who only duplicate a single drive at a time, should consider a different device.

1-to-19 target capacity decides fit

The defining specification is the ability to write to 19 target drives in one operation. If your workflow demands more than 19 simultaneous copies, this unit cannot meet that need.

Najważniejsze cechy

  • Copy 19 drives simultaneously at 36 GB/min
  • Standalone operation — no computer or software needed
  • Sanitise data to DoD 5220.22-M standard
  • Accepts 2.5″ and 3.5″ SATA drives without adapters
  • Slot-load bays with 40 mm cooling fans per port

Specyfikacja

BrandSystor
TypeHard Drive Duplicator
Target1 to 19
Data Transfer Rate36.0GB/min (600MB/sec)
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Package Contentssee pictures for details

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will the 40 mm rear fans and per-bay outtake fans need cleaning or replacement after heavy use?

The unit ships with a 40 mm rear fan and an individual outtake fan on each of the 19 drive bays to maintain airflow during extended copy or sanitise jobs.

What throughput ceiling appears first when all 19 SATA bays run continuously at the rated 600 MB/s?

Each bay can sustain up to 600 MB/s (36 GB/min), so the aggregate bandwidth across 19 targets is the limiting factor once every slot is populated.

How much heat and noise should I expect from the dual hot-swap bays and power supply during an all-day DoD 5220.22-M wipe?

Built-in vents, a rear 40 mm fan and a dedicated outtake fan per bay are designed to dissipate heat from the high-performance power supply during prolonged multi-pass erase cycles.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.