Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 70mm square case fan 25mm thick with three-pin connector

Zyvpee

Zyvpee 2810KL-S4W-B39 70mm 25mm 3-pin ball-bearing case fan

SKU CH-MGWA-18GBW

70 mm ball-bearing case fan runs at 12 V and 0.19 A with a three-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCasse Fan
  • Ball-bearing design reduces friction for longer life
  • 12 V 0.19 A power draw keeps energy use low
  • 70 mm by 25 mm frame fits tight chassis spaces
  • Three-pin connector enables speed monitoring
  • Non-LED black finish suits stealth builds

Compact 70 mm Case Fan

The Zyvpee 2810KL-S4W-B39 is a 70 mm square case fan designed for tight chassis spaces or targeted component cooling. Its ball-bearing motor and 3-pin power connector suit system builders who need a straightforward replacement or supplementary airflow device. The non-LED black frame keeps the appearance neutral in any build.

Check Connector And Clearance

Verify that your motherboard or fan controller provides a standard 3-pin header before ordering. Confirm the mounting holes match a 70 mm square pattern and that 25 mm thickness fits the intended location, whether on a case panel, heatsink or radiator. The fan draws 0.19 A at 12 V, so ensure the header can supply that current.

Ball Bearing Thermals And Acoustics

The ball-bearing design delivers consistent rotation with reduced friction compared to sleeve alternatives, supporting steady airflow in daily operation. Power draw is 0.19 A at 12 V, resulting in modest heat contribution to the loop. Expect typical mechanical noise from a 70 mm frame at operating speed without LED illumination adding electrical load.

Pluspunten

  • Ball-bearing design reduces friction for longer life
  • 12 V 0.19 A power draw keeps energy use low
  • 70 mm by 25 mm frame fits tight chassis spaces
  • Three-pin connector enables speed monitoring
  • Non-LED black finish suits stealth builds

Specificaties

BrandZyvpee
Series2810KL-S4W-B39 XA1
Model2810KL-S4W-B39
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCasse Fan
Dimensions70*25MM

Vragen over dit artikel

Does the 70 mm fan ship with mounting screws or do I need to buy them separately?

The fan is supplied as a standalone unit; mounting hardware is not included and must be sourced separately.

The model 2810KL-S4W-B39 lists 12 V 0.19 A — is there an alternative voltage or current version to choose from?

Only the 12 V 0.19 A variant is offered; no other voltage or current options are available for this model.

What does the 3-pin connector mean for speed control once the fan is installed in a case?

The three-pin interface provides power, ground and a tachometer signal, allowing the motherboard to monitor RPM but not to vary voltage for PWM speed regulation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.