Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black cylindrical AC centrifugal fan, 225 by 99 mm, four-wire connector, IP44 rating

Zyvpee

Zyvpee R2E225-BD92-09 225*99mm 230V 0.60A 4 Wires IP44 Centrifugal case fan

SKU CH-TXKS-2FFBF

AC centrifugal case fan with 225×99 mm housing, 230 V 0.60 A four-wire supply and IP44 ingress protection

  • TypeCase Fan
  • Fan Size230mm
  • Bearing Type2 Ball
  • Power Connector4 Wires
  • ColorBlack
  • LEDNon-LED
  • AC centrifugal airflow for inverter FFU units
  • 230 V 0.60 A four-wire power connection
  • IP44 ingress protection resists dust and splashes
  • 225 × 99 mm frame fits standard enclosures
  • Dual ball bearing ensures long service life

Purpose and fit

This Zyvpee centrifugal case fan is built for 230 V AC systems such as inverter-driven fan filter units. It targets technicians who need a direct-mains airflow device with an IP44 rating for protected environments.

Installation checks

Verify that your chassis can accept a 225 mm by 99 mm housing and that a 230 V mains supply with a four-wire connection is available. The unit draws 0.60 A, so confirm the circuit and wiring meet that load.

Sustained operation

The dual ball bearing and IP44 enclosure support continuous running in filtered or humid conditions. AC centrifugal design maintains steady pressure without the speed drop-off seen in short-burst DC fans.

Pluspunten

  • AC centrifugal airflow for inverter FFU units
  • 230 V 0.60 A four-wire power connection
  • IP44 ingress protection resists dust and splashes
  • 225 × 99 mm frame fits standard enclosures
  • Dual ball bearing ensures long service life

Specificaties

SeriesR2E225-BD92-09
ModelR2E225-BD92-09
TypeCase Fan
Fan Size230mm
Bearing Type2 Ball
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesAC centrifugal fan
Dimensions225*99mm

Vragen over dit artikel

Does the R2E225-BD92-09 ship with any mounting screws or a power cable, or must those be purchased separately?

The fan is supplied as the unit shown in the photos; mounting hardware and a mating 4-wire connector are not included and must be sourced separately.

The model is listed as 230 V 0.60 A with a 4-wire lead — which wire functions should I expect for speed control and monitoring?

The four wires carry mains supply, ground and a PWM/tacho pair for inverter-driven speed regulation and RPM feedback.

With an IP44 rating and 225 × 99 mm frame, how much airflow can I realistically expect inside a standard server chassis?

As an AC centrifugal blower, it pressurises the plenum rather than moving free air; actual throughput depends on system static pressure and inverter drive settings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.