Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 60 by 25 mm case fan with two wires

Zyvpee

Zyvpee RDM6025S 60x25mm 12V 0.1A 2 Pin Case Fan

SKU CH-4KFR-BVD11

A 60 x 25 mm 12 V sleeve-bearing case fan running at 1600-1999 RPM with a two-pin connector

  • TypeCase Fan
  • Bearing TypeSleeve
  • RPM1600-1999 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.1 A draw keeps power use low
  • 60 x 25 mm frame fits tight chassis spaces
  • Sleeve bearing runs quietly at 1600-1999 RPM
  • Two-pin DC connector simplifies motherboard hookup
  • Non-LED black finish suits stealth builds

60 x 25 mm Sleeve-Bearing Case Fan

The Zyvpee RDM6025S is a 12 V DC case fan measuring 60 by 25 mm. It draws 0.1 A through a two-pin power connector and runs without any LED lighting. The black sleeve-bearing unit is intended for compact chassis or targeted airflow upgrades where space is limited.

Sustained Airflow at 1600 to 1999 RPM

Under continuous load the fan operates between 1600 and 1999 RPM, delivering steady airflow rather than a brief burst. The sleeve bearing maintains consistent rotation during extended sessions, making it suitable for always-on systems or secondary cooling zones that run for long periods.

Check Two-Pin Header and Mounting Clearance

Verify that your motherboard or fan controller provides a two-pin DC header before ordering. Confirm the chassis can accommodate a 60 mm frame with 25 mm thickness and that the screw-hole pattern matches your mounting points. The non-LED design means no extra lighting cables are required.

Pluspunten

  • 12 V 0.1 A draw keeps power use low
  • 60 x 25 mm frame fits tight chassis spaces
  • Sleeve bearing runs quietly at 1600-1999 RPM
  • Two-pin DC connector simplifies motherboard hookup
  • Non-LED black finish suits stealth builds

Specificaties

BrandZyvpee
SeriesRDM6025S
ModelRDM6025S
TypeCase Fan
Bearing TypeSleeve
RPM1600-1999 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions60*25mm

Vragen over dit artikel

How much noise and heat does the RDM6025S produce when it runs continuously at 1600-1999 RPM?

The sleeve-bearing fan spins at 1600-1999 RPM and draws 0.1 A at 12 V, so it generates modest airflow with low acoustic output and minimal heat during all-day operation.

What power header must my motherboard or controller provide for the 2-pin connector on this fan?

You need a standard 12 V DC two-pin header capable of supplying at least 0.1 A; the fan has no PWM or tachometer wire, so voltage control is the only speed option.

Will the 60 mm by 25 mm frame and 2-pin plug fit the older chassis and fan headers I already have?

The 60*25 mm dimensions match legacy 60 mm mounts, and the two-pin plug fits any 12 V two-pin header found on older motherboards or fan controllers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.