Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small black 60 by 25 mm case fan with two wires

Zyvpee

Zyvpee RDM6025S 60x25mm 12V 0.1A 2 Pin Case Fan

SKU CH-4KFR-BVD11

A 60 x 25 mm 12 V sleeve-bearing case fan running at 1600-1999 RPM with a two-pin connector

  • TypeCase Fan
  • Bearing TypeSleeve
  • RPM1600-1999 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.1 A draw keeps power use low
  • 60 x 25 mm frame fits tight chassis spaces
  • Sleeve bearing runs quietly at 1600-1999 RPM
  • Two-pin DC connector simplifies motherboard hookup
  • Non-LED black finish suits stealth builds

60 x 25 mm Sleeve-Bearing Case Fan

The Zyvpee RDM6025S is a 12 V DC case fan measuring 60 by 25 mm. It draws 0.1 A through a two-pin power connector and runs without any LED lighting. The black sleeve-bearing unit is intended for compact chassis or targeted airflow upgrades where space is limited.

Sustained Airflow at 1600 to 1999 RPM

Under continuous load the fan operates between 1600 and 1999 RPM, delivering steady airflow rather than a brief burst. The sleeve bearing maintains consistent rotation during extended sessions, making it suitable for always-on systems or secondary cooling zones that run for long periods.

Check Two-Pin Header and Mounting Clearance

Verify that your motherboard or fan controller provides a two-pin DC header before ordering. Confirm the chassis can accommodate a 60 mm frame with 25 mm thickness and that the screw-hole pattern matches your mounting points. The non-LED design means no extra lighting cables are required.

Najważniejsze cechy

  • 12 V 0.1 A draw keeps power use low
  • 60 x 25 mm frame fits tight chassis spaces
  • Sleeve bearing runs quietly at 1600-1999 RPM
  • Two-pin DC connector simplifies motherboard hookup
  • Non-LED black finish suits stealth builds

Specyfikacja

BrandZyvpee
SeriesRDM6025S
ModelRDM6025S
TypeCase Fan
Bearing TypeSleeve
RPM1600-1999 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions60*25mm

Pytania dotyczące tego produktu

How much noise and heat does the RDM6025S produce when it runs continuously at 1600-1999 RPM?

The sleeve-bearing fan spins at 1600-1999 RPM and draws 0.1 A at 12 V, so it generates modest airflow with low acoustic output and minimal heat during all-day operation.

What power header must my motherboard or controller provide for the 2-pin connector on this fan?

You need a standard 12 V DC two-pin header capable of supplying at least 0.1 A; the fan has no PWM or tachometer wire, so voltage control is the only speed option.

Will the 60 mm by 25 mm frame and 2-pin plug fit the older chassis and fan headers I already have?

The 60*25 mm dimensions match legacy 60 mm mounts, and the two-pin plug fits any 12 V two-pin header found on older motherboards or fan controllers.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.