OWC 32GB (2x16GB) DDR4 2666 ECC UDIMM for Synology SA3200D memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 ECC UD…
Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.
OWC
A 32 GB kit of two 16 GB DDR4 2666 ECC UDIMM modules validated for Synology RS2818RP+
Capacity 32GB (2 x 16GB)
This OWC kit adds 32GB of DDR4 2666 ECC UDIMM memory to the Synology RackStation RS2818RP+. Two 16GB modules bring the NAS to a higher capacity for virtualization, heavy file sharing or surveillance workloads. The unbuffered ECC design matches the system's native memory architecture. Builders needing registered DIMMs or a different form factor cannot use this kit.
At DDR4 2666 CL19 the modules deliver steady bandwidth during long backup windows or multi-user database access. ECC corrects single-bit errors on the fly, preventing silent data corruption that can accumulate under continuous load. The 1.2V operating voltage keeps power draw modest inside a rack chassis. Systems requiring faster speeds or lower latency than PC4-21300 will not benefit from this grade.
The 288-pin UDIMMs slot directly into the RS2818RP+ memory sockets without adapters or cables. OWC validates each stick at 2666, 2400 and 2133MHz, so the kit posts at the highest speed the platform supports. Installers must populate the correct channel pair; mixing with existing non-ECC or different-rank modules will prevent boot. No heat spreader is fitted, so airflow over the PCB is essential.
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS2818RP+ |
Andre versjoner av denne modellen
Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.
Each module operates at 1.2V, the standard DDR4 voltage, so total power scales with the 32GB capacity and the NAS workload rather than exceeding JEDEC limits.
The kit is validated for the RS2818RP+ and follows JEDEC PC4-21300 CL19 timings, so the NAS detects the 2 x 16GB modules at 2666MHz without extra configuration.
Yes — the modules are backward compatible with 2133MHz and 2400MHz speeds, allowing mixed-speed operation at the lowest common frequency.
Også i denne avdelingen
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Det du betaler med, og det du ser prisene i.
Sendes fra lommeboken din i kassen
Kun visning — katalogen er prissatt i USD
Fant ingen valuta.
Velg språket nettstedet snakker til deg på.
Ingen språk samsvarer.
Ny her?
Har du allerede en konto?
Det finnes ingen automatisk tilbakestilling: butikken sender ikke e-post, så det finnes ingen engangslenke å be om. La adressen stå på kontoen, så blir den behandlet manuelt.
Forespørsel registrert
Ingenting er på vei til innboksen din — butikken sender ingen e-post i det hele tatt. Noen behandler dette manuelt.
Husket du det likevel?