OWC 32GB (2x16GB) DDR4 2666 ECC UDIMM for Synology SA3200D memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 ECC UD…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
A 32 GB kit of two 16 GB DDR4 2666 ECC UDIMM modules validated for Synology RS2818RP+
Capacity 32GB (2 x 16GB)
This OWC kit adds 32GB of DDR4 2666 ECC UDIMM memory to the Synology RackStation RS2818RP+. Two 16GB modules bring the NAS to a higher capacity for virtualization, heavy file sharing or surveillance workloads. The unbuffered ECC design matches the system's native memory architecture. Builders needing registered DIMMs or a different form factor cannot use this kit.
At DDR4 2666 CL19 the modules deliver steady bandwidth during long backup windows or multi-user database access. ECC corrects single-bit errors on the fly, preventing silent data corruption that can accumulate under continuous load. The 1.2V operating voltage keeps power draw modest inside a rack chassis. Systems requiring faster speeds or lower latency than PC4-21300 will not benefit from this grade.
The 288-pin UDIMMs slot directly into the RS2818RP+ memory sockets without adapters or cables. OWC validates each stick at 2666, 2400 and 2133MHz, so the kit posts at the highest speed the platform supports. Installers must populate the correct channel pair; mixing with existing non-ECC or different-rank modules will prevent boot. No heat spreader is fitted, so airflow over the PCB is essential.
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS2818RP+ |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Each module operates at 1.2V, the standard DDR4 voltage, so total power scales with the 32GB capacity and the NAS workload rather than exceeding JEDEC limits.
The kit is validated for the RS2818RP+ and follows JEDEC PC4-21300 CL19 timings, so the NAS detects the 2 x 16GB modules at 2666MHz without extra configuration.
Yes — the modules are backward compatible with 2133MHz and 2400MHz speeds, allowing mixed-speed operation at the lowest common frequency.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?