OWC 32GB (2x16GB) DDR4 2666 ECC UDIMM for Synology SA3200D memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 ECC UD…
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
OWC
A 32 GB kit of two 16 GB DDR4 2666 ECC UDIMM modules validated for Synology RS2818RP+
Capacity 32GB (2 x 16GB)
This OWC kit adds 32GB of DDR4 2666 ECC UDIMM memory to the Synology RackStation RS2818RP+. Two 16GB modules bring the NAS to a higher capacity for virtualization, heavy file sharing or surveillance workloads. The unbuffered ECC design matches the system's native memory architecture. Builders needing registered DIMMs or a different form factor cannot use this kit.
At DDR4 2666 CL19 the modules deliver steady bandwidth during long backup windows or multi-user database access. ECC corrects single-bit errors on the fly, preventing silent data corruption that can accumulate under continuous load. The 1.2V operating voltage keeps power draw modest inside a rack chassis. Systems requiring faster speeds or lower latency than PC4-21300 will not benefit from this grade.
The 288-pin UDIMMs slot directly into the RS2818RP+ memory sockets without adapters or cables. OWC validates each stick at 2666, 2400 and 2133MHz, so the kit posts at the highest speed the platform supports. Installers must populate the correct channel pair; mixing with existing non-ECC or different-rank modules will prevent boot. No heat spreader is fitted, so airflow over the PCB is essential.
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS2818RP+ |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
Each module operates at 1.2V, the standard DDR4 voltage, so total power scales with the 32GB capacity and the NAS workload rather than exceeding JEDEC limits.
The kit is validated for the RS2818RP+ and follows JEDEC PC4-21300 CL19 timings, so the NAS detects the 2 x 16GB modules at 2666MHz without extra configuration.
Yes — the modules are backward compatible with 2133MHz and 2400MHz speeds, allowing mixed-speed operation at the lowest common frequency.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?