OWC 32GB (2x16GB) DDR4 2666 ECC UDIMM for Synology SA3200D memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 ECC UD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
A 32 GB kit of two 16 GB DDR4 2666 ECC UDIMM modules validated for Synology RS2818RP+
Capacity 32GB (2 x 16GB)
This OWC kit adds 32GB of DDR4 2666 ECC UDIMM memory to the Synology RackStation RS2818RP+. Two 16GB modules bring the NAS to a higher capacity for virtualization, heavy file sharing or surveillance workloads. The unbuffered ECC design matches the system's native memory architecture. Builders needing registered DIMMs or a different form factor cannot use this kit.
At DDR4 2666 CL19 the modules deliver steady bandwidth during long backup windows or multi-user database access. ECC corrects single-bit errors on the fly, preventing silent data corruption that can accumulate under continuous load. The 1.2V operating voltage keeps power draw modest inside a rack chassis. Systems requiring faster speeds or lower latency than PC4-21300 will not benefit from this grade.
The 288-pin UDIMMs slot directly into the RS2818RP+ memory sockets without adapters or cables. OWC validates each stick at 2666, 2400 and 2133MHz, so the kit posts at the highest speed the platform supports. Installers must populate the correct channel pair; mixing with existing non-ECC or different-rank modules will prevent boot. No heat spreader is fitted, so airflow over the PCB is essential.
| Brand | OWC |
|---|---|
| Part Number | 2E6D42R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS2818RP+ |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Each module operates at 1.2V, the standard DDR4 voltage, so total power scales with the 32GB capacity and the NAS workload rather than exceeding JEDEC limits.
The kit is validated for the RS2818RP+ and follows JEDEC PC4-21300 CL19 timings, so the NAS detects the 2 x 16GB modules at 2666MHz without extra configuration.
Yes — the modules are backward compatible with 2133MHz and 2400MHz speeds, allowing mixed-speed operation at the lowest common frequency.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม