Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Seagate Nytro 3530 3.2TB 2.5 inch enterprise SSD with SAS connectors

Seagate

Seagate Nytro 3530 3.2TB SAS 12Gb/s 2.5" enterprise SSD (XS3200LE10003)

SKU CH-ENH5-PAHEH MPN XS3200LE10003

3.2TB enterprise SAS SSD with dual 12Gb/s ports, up to 2100MB/s sequential reads and 3 DWPD endurance

  • Form Factor2.5"
  • Capacity3.2TB
  • Memory ComponentseMLC
  • InterfaceSAS 12Gb/s
  • Max Sequential ReadUp to 1060 MBps
  • Max Sequential WriteUp to 950 MBps
  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Enterprise SAS SSD for high-capacity workloads

The Seagate Nytro 3530 delivers 3.2TB of eMLC storage through a dual-port SAS 12Gb/s interface. It is built for servers and storage arrays that need consistent low-latency access in read-intensive or mixed enterprise applications.

Sustained performance under dual-port bandwidth

The drive saturates dual 12Gb/s SAS lanes for an effective 24Gb/s wide-port interface. Sequential reads reach up to 2100 MBps while writes hit 950 MBps, and the 3 DWPD endurance rating supports steady mixed workloads without thermal throttling.

Direct 2.5-inch bay installation with SAS backplane

The standard 2.5-inch form factor slides into hot-swap bays using the dual 12Gb/s SAS connectors. No extra cabling or adapters are required, but the system must provide a dual-port SAS backplane or HBA to enable the full 24Gb/s wide-port bandwidth.

Høydepunkter

  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Spesifikasjoner

BrandSeagate
ModelXS3200LE10003
Form Factor2.5"
Capacity3.2TB
Memory ComponentseMLC
InterfaceSAS 12Gb/s
Max Sequential ReadUp to 1060 MBps
Max Sequential WriteUp to 950 MBps
Fraktvekt0.20 kg
Pakkestørrelse229 × 152 × 76 mm

Spørsmål om denne varen

How much power does the XS3200LE10003 draw during sustained 24Gb/s wide-port operation?

The drive uses a dual 12Gb/s SAS interface that can saturate 24Gb/s bandwidth for up to 2100MB/s sequential reads and 950MB/s writes, rated at 3 DWPD for consistent enterprise workloads.

Which server backplane and controller combination is required for the 2.5" SAS 12Gb/s form factor?

The 2.5" form factor fits standard SAS 12Gb/s backplanes; a dual-port SAS HBA or RAID controller with 12Gb/s lanes is needed to enable the 24Gb/s wide-port and dual-port dynamic configurations.

Will the Nytro 3530 negotiate down to 6Gb/s SAS on my existing 3000-series controller?

The dual 12Gb/s SAS interface supports legacy signalling and dual-port dynamic configurations, allowing operation on older SAS infrastructure while still delivering up to 1060MB/s reads and 950MB/s writes.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.