SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Seagate
3.2TB enterprise SAS SSD with dual 12Gb/s ports, up to 2100MB/s sequential reads and 3 DWPD endurance
The Seagate Nytro 3530 delivers 3.2TB of eMLC storage through a dual-port SAS 12Gb/s interface. It is built for servers and storage arrays that need consistent low-latency access in read-intensive or mixed enterprise applications.
The drive saturates dual 12Gb/s SAS lanes for an effective 24Gb/s wide-port interface. Sequential reads reach up to 2100 MBps while writes hit 950 MBps, and the 3 DWPD endurance rating supports steady mixed workloads without thermal throttling.
The standard 2.5-inch form factor slides into hot-swap bays using the dual 12Gb/s SAS connectors. No extra cabling or adapters are required, but the system must provide a dual-port SAS backplane or HBA to enable the full 24Gb/s wide-port bandwidth.
| Brand | Seagate |
|---|---|
| Model | XS3200LE10003 |
| Form Factor | 2.5" |
| Capacity | 3.2TB |
| Memory Components | eMLC |
| Interface | SAS 12Gb/s |
| Max Sequential Read | Up to 1060 MBps |
| Max Sequential Write | Up to 950 MBps |
| 出貨重量 | 0.20 kg |
| 包裝尺寸 | 229 × 152 × 76 mm |
The drive uses a dual 12Gb/s SAS interface that can saturate 24Gb/s bandwidth for up to 2100MB/s sequential reads and 950MB/s writes, rated at 3 DWPD for consistent enterprise workloads.
The 2.5" form factor fits standard SAS 12Gb/s backplanes; a dual-port SAS HBA or RAID controller with 12Gb/s lanes is needed to enable the 24Gb/s wide-port and dual-port dynamic configurations.
The dual 12Gb/s SAS interface supports legacy signalling and dual-port dynamic configurations, allowing operation on older SAS infrastructure while still delivering up to 1060MB/s reads and 950MB/s writes.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?