Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Seagate Nytro 3530 3.2TB 2.5 inch enterprise SSD with SAS connectors

Seagate

Seagate Nytro 3530 3.2TB SAS 12Gb/s 2.5" enterprise SSD (XS3200LE10003)

SKU CH-ENH5-PAHEH MPN XS3200LE10003

3.2TB enterprise SAS SSD with dual 12Gb/s ports, up to 2100MB/s sequential reads and 3 DWPD endurance

  • Form Factor2.5"
  • Capacity3.2TB
  • Memory ComponentseMLC
  • InterfaceSAS 12Gb/s
  • Max Sequential ReadUp to 1060 MBps
  • Max Sequential WriteUp to 950 MBps
  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Enterprise SAS SSD for high-capacity workloads

The Seagate Nytro 3530 delivers 3.2TB of eMLC storage through a dual-port SAS 12Gb/s interface. It is built for servers and storage arrays that need consistent low-latency access in read-intensive or mixed enterprise applications.

Sustained performance under dual-port bandwidth

The drive saturates dual 12Gb/s SAS lanes for an effective 24Gb/s wide-port interface. Sequential reads reach up to 2100 MBps while writes hit 950 MBps, and the 3 DWPD endurance rating supports steady mixed workloads without thermal throttling.

Direct 2.5-inch bay installation with SAS backplane

The standard 2.5-inch form factor slides into hot-swap bays using the dual 12Gb/s SAS connectors. No extra cabling or adapters are required, but the system must provide a dual-port SAS backplane or HBA to enable the full 24Gb/s wide-port bandwidth.

Puncte forte

  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Specificații

BrandSeagate
ModelXS3200LE10003
Form Factor2.5"
Capacity3.2TB
Memory ComponentseMLC
InterfaceSAS 12Gb/s
Max Sequential ReadUp to 1060 MBps
Max Sequential WriteUp to 950 MBps
Greutate la expediere0.20 kg
Dimensiunile coletului229 × 152 × 76 mm

Întrebări despre acest articol

How much power does the XS3200LE10003 draw during sustained 24Gb/s wide-port operation?

The drive uses a dual 12Gb/s SAS interface that can saturate 24Gb/s bandwidth for up to 2100MB/s sequential reads and 950MB/s writes, rated at 3 DWPD for consistent enterprise workloads.

Which server backplane and controller combination is required for the 2.5" SAS 12Gb/s form factor?

The 2.5" form factor fits standard SAS 12Gb/s backplanes; a dual-port SAS HBA or RAID controller with 12Gb/s lanes is needed to enable the 24Gb/s wide-port and dual-port dynamic configurations.

Will the Nytro 3530 negotiate down to 6Gb/s SAS on my existing 3000-series controller?

The dual 12Gb/s SAS interface supports legacy signalling and dual-port dynamic configurations, allowing operation on older SAS infrastructure while still delivering up to 1060MB/s reads and 950MB/s writes.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.