Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Seagate Nytro 3530 3.2TB 2.5 inch enterprise SSD with SAS connectors

Seagate

Seagate Nytro 3530 3.2TB SAS 12Gb/s 2.5" enterprise SSD (XS3200LE10003)

SKU CH-ENH5-PAHEH MPN XS3200LE10003

3.2TB enterprise SAS SSD with dual 12Gb/s ports, up to 2100MB/s sequential reads and 3 DWPD endurance

  • Form Factor2.5"
  • Capacity3.2TB
  • Memory ComponentseMLC
  • InterfaceSAS 12Gb/s
  • Max Sequential ReadUp to 1060 MBps
  • Max Sequential WriteUp to 950 MBps
  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Enterprise SAS SSD for high-capacity workloads

The Seagate Nytro 3530 delivers 3.2TB of eMLC storage through a dual-port SAS 12Gb/s interface. It is built for servers and storage arrays that need consistent low-latency access in read-intensive or mixed enterprise applications.

Sustained performance under dual-port bandwidth

The drive saturates dual 12Gb/s SAS lanes for an effective 24Gb/s wide-port interface. Sequential reads reach up to 2100 MBps while writes hit 950 MBps, and the 3 DWPD endurance rating supports steady mixed workloads without thermal throttling.

Direct 2.5-inch bay installation with SAS backplane

The standard 2.5-inch form factor slides into hot-swap bays using the dual 12Gb/s SAS connectors. No extra cabling or adapters are required, but the system must provide a dual-port SAS backplane or HBA to enable the full 24Gb/s wide-port bandwidth.

Prednosti

  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Špecifikácie

BrandSeagate
ModelXS3200LE10003
Form Factor2.5"
Capacity3.2TB
Memory ComponentseMLC
InterfaceSAS 12Gb/s
Max Sequential ReadUp to 1060 MBps
Max Sequential WriteUp to 950 MBps
Prepravná hmotnosť0.20 kg
Rozmery balenia229 × 152 × 76 mm

Otázky k tomuto produktu

How much power does the XS3200LE10003 draw during sustained 24Gb/s wide-port operation?

The drive uses a dual 12Gb/s SAS interface that can saturate 24Gb/s bandwidth for up to 2100MB/s sequential reads and 950MB/s writes, rated at 3 DWPD for consistent enterprise workloads.

Which server backplane and controller combination is required for the 2.5" SAS 12Gb/s form factor?

The 2.5" form factor fits standard SAS 12Gb/s backplanes; a dual-port SAS HBA or RAID controller with 12Gb/s lanes is needed to enable the 24Gb/s wide-port and dual-port dynamic configurations.

Will the Nytro 3530 negotiate down to 6Gb/s SAS on my existing 3000-series controller?

The dual 12Gb/s SAS interface supports legacy signalling and dual-port dynamic configurations, allowing operation on older SAS infrastructure while still delivering up to 1060MB/s reads and 950MB/s writes.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.