We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Seagate Nytro 3530 3.2TB 2.5 inch enterprise SSD with SAS connectors

Seagate

Seagate Nytro 3530 3.2TB SAS 12Gb/s 2.5" enterprise SSD (XS3200LE10003)

SKU CH-ENH5-PAHEH MPN XS3200LE10003

3.2TB enterprise SAS SSD with dual 12Gb/s ports, up to 2100MB/s sequential reads and 3 DWPD endurance

  • Form Factor2.5"
  • Capacity3.2TB
  • Memory ComponentseMLC
  • InterfaceSAS 12Gb/s
  • Max Sequential ReadUp to 1060 MBps
  • Max Sequential WriteUp to 950 MBps
  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Enterprise SAS SSD for high-capacity workloads

The Seagate Nytro 3530 delivers 3.2TB of eMLC storage through a dual-port SAS 12Gb/s interface. It is built for servers and storage arrays that need consistent low-latency access in read-intensive or mixed enterprise applications.

Sustained performance under dual-port bandwidth

The drive saturates dual 12Gb/s SAS lanes for an effective 24Gb/s wide-port interface. Sequential reads reach up to 2100 MBps while writes hit 950 MBps, and the 3 DWPD endurance rating supports steady mixed workloads without thermal throttling.

Direct 2.5-inch bay installation with SAS backplane

The standard 2.5-inch form factor slides into hot-swap bays using the dual 12Gb/s SAS connectors. No extra cabling or adapters are required, but the system must provide a dual-port SAS backplane or HBA to enable the full 24Gb/s wide-port bandwidth.

Highlights

  • High-capacity 3.2TB drive stores more enterprise data
  • Dual SAS 12Gb/s ports deliver up to 2100MB/s sequential reads
  • 5" form factor fits dense server bays
  • 3 DWPD endurance rating handles heavy write workloads
  • SAS 12Gb/s interface provides 24Gb/s wide-port bandwidth

Specifications

BrandSeagate
ModelXS3200LE10003
Form Factor2.5"
Capacity3.2TB
Memory ComponentseMLC
InterfaceSAS 12Gb/s
Max Sequential ReadUp to 1060 MBps
Max Sequential WriteUp to 950 MBps
Shipping weight0.20 kg
Package size229 × 152 × 76 mm

Questions about this item

How much power does the XS3200LE10003 draw during sustained 24Gb/s wide-port operation?

The drive uses a dual 12Gb/s SAS interface that can saturate 24Gb/s bandwidth for up to 2100MB/s sequential reads and 950MB/s writes, rated at 3 DWPD for consistent enterprise workloads.

Which server backplane and controller combination is required for the 2.5" SAS 12Gb/s form factor?

The 2.5" form factor fits standard SAS 12Gb/s backplanes; a dual-port SAS HBA or RAID controller with 12Gb/s lanes is needed to enable the 24Gb/s wide-port and dual-port dynamic configurations.

Will the Nytro 3530 negotiate down to 6Gb/s SAS on my existing 3000-series controller?

The dual 12Gb/s SAS interface supports legacy signalling and dual-port dynamic configurations, allowing operation on older SAS infrastructure while still delivering up to 1060MB/s reads and 950MB/s writes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.